Messages

91

Universalbox Dongle / To all UB user

« on: April 27, 2008, 05:40:36 AM »

bro you can address this matter in their support site:

http://www.gsmhosting.net/vbb/forumdisplay.php?s=&daysprune=&f=305

b.r.

92

Setool Section / Z530i hardtime flashing unit

« on: April 24, 2008, 08:36:59 AM »

problem : Z530i hang/restart when powered on.
action taken : Tried 1st flashing with setool. But always get this error " Send superblock command NAK ". I used fully charged battery and rps.Tried many times always this same error. For this reheat cpu and flash I.C. Now flashing completed succesfully.

error log:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35928400144671 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R6BA030_CXC1250457_HONG_KONG_MU
Restore from:R6BA030_CXC1250457_HONG_KONG_MU
writing E:\setool flashes\SE\Z530i\r6ac001_CXC1250454_GENERIC_MU.ssw .cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:328
Will flash 328 blocks...
Send superblock command NAK
Elapsed: 327 secs.

Flashing screenshots after reheat of cpu and flash i.c.



unlock repair





b.r.

93

New Member's Lounge / hi to all !!!

« on: April 23, 2008, 05:20:56 AM »

Welcome Sir...........

b.r.

94

Setool Section / K600 white-screen/ freeze on "please wait" repair done

« on: April 19, 2008, 03:07:58 PM »

Problem : k600 white screen only
Action taken: Flash unit first with main +fs settings complete. After flashing phone powers up but just freezes on " please wait " display menu. To solve that i flashed it again with k600_gdfs_in_ ssw_format.ssw (can be found on setool gdfs_in_ssw_format), main + fs. settings complete/unlock after flash/patch otp<>gdfs check in firmware/allow imei change when unlocking.

Setool logs:

v0.914027/UNI
CARD SERIAL: 0000:)
Loaded 51 flash descriptors
Connecting to UFS...
Found 2 FTDI device(s).
UFS #2:) READY
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:36 PAF:1 IMEI:35657300002144 CERT:RED
 
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:050810 0923 DB2000_CRIPPLED_PRELOADER_SETOOL2_R2B
Flash ID check:890D
Flash props sent ok
FOUND: R2T002_CXC1250079_CHINA_MI
Restore from:R2T002_CXC1250079_CHINA_MI
Switching to USB...
interface not changed
writing E:\BOX UPDATES\setool updates\v0.914020\gdfs_in_ssw_format\k600_gdfs_in_ssw_format.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:16
Will flash 16 blocks...
SSW loading returns:0
writing E:\setool flashes\SE\K600\R2T002\K600_r2t002_main_Red49.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:353
Will flash 353 blocks...
SSW loading returns:0
writing E:\setool flashes\SE\K600\R2T002\K600_r2t002_fs_Red49.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:114
Will flash 114 blocks...
SSW loading returns:0
LDR:051125 1048 FILE_SYSTEM_LOADER_SETOOL2_V24
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed
writing tpa/preset/custom/C3_PCA_G3v2.cer
writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
writing tpa/preset/custom/customize.xml
writing tpa/preset/custom/DESKTOP_HOOK_2.itm
writing tpa/preset/custom/Entrust.net Root Certificate.cer
writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
writing tpa/preset/custom/GAMES_HOOK_3.itm
writing tpa/preset/custom/GTE_CyberTrust_Root.cer
writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
writing tpa/preset/custom/Root.cer
writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
writing tpa/preset/custom/ThawtePremium.der
writing tpa/preset/custom/ThawteServerCA.cer
writing tpa/preset/custom/Utiroot.cer
writing tpa/preset/custom/VeriSignClass3Root.cer
writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
Phone detached
Elapsed: 901 secs.
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:36 PAF:1 IMEI:35657300002144 CERT:RED
 
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:050810 0923 DB2000_CRIPPLED_PRELOADER_SETOOL2_R2B
Flash ID check:890D
Flash props sent ok
FOUND: R2T002_CXC1250079_CHINA_MI
Restore from:R2T002_CXC1250079_CHINA_MI
Searching...
Firmware OTP check determined.
Setting up GDFS...
IMEI MISMATCH !!!! POSSIBLE STOLEN PHONE !!!!!
ORIGINAL IMEI:35657300002144
CURRENT  IMEI:35657300001947
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "22431451"
Signing...
control keys complete.
full sig complete.
Unlock DONE
Elapsed: 85 secs.


b.r.

95

HWK / D900i unlock succes ufs hwk samsung

« on: April 19, 2008, 09:47:06 AM »

I used D800 cable from Ns Pro.


b.r.

96

DreamBox / K800 white screen success repair via flashing

« on: April 18, 2008, 02:38:05 PM »

-- Writing firmware-----------------------------------------------------------
User selected phone K800 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 353996-01-53744:)
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Sending Main Firmware Certificate ... OK.
Writing Main Firmware Blocks Finished.
Sending File System Certificate ... OK.
Writing File System Blocks Finished.
Starting CS Loader GDFS Service ...
Starting CS Loader File System Service ...
Uploading files:
> tpa\preset\custom\CONTENT_DOWNLOAD_HOOK.itm ... OK.
> tpa\preset\custom\Customize.xml ... OK.
> tpa\preset\custom\FM_PICTURES_HOOK_3.itm ... OK.
> tpa\preset\custom\FM_SOUNDS_HOOK_3.itm ... OK.
> tpa\preset\custom\FM_THEMES_HOOK_3.itm ... OK.
> tpa\preset\custom\FM_VIDEOS_HOOK_3.itm ... OK.
> tpa\preset\custom\GAMES_HOOK_3.itm ... OK.
> tpa\preset\custom\MEDIA_PLAYER_HOOK_3.itm ... OK.
> tpa\preset\custom\ORG_APPLICATIONS_HOOK_3.itm ... OK.
> tpa\preset\custom\preloaded_config.xml ... OK.
> tpa\preset\custom\SETT_RINGTONE_HOOK_1.itm ... OK.
> tpa\preset\custom\SETT_SCREENSAVER_HOOK_1.itm ... OK.
> tpa\preset\custom\SETT_STARTSHOW_HOOK_1.itm ... OK.
> tpa\preset\custom\SETT_WALLPAPER_HOOK_1.itm ... OK.
> tpa\preset\custom\VIDEO_PLAYER_HOOK_1.itm ... OK.

Customizing GDFS ...
country : Sweden
operator : Sony Ericsson
language-variant-name : M_EAST_N_AFR

Done.

Phone's original CID is CID49 convert it first to CID52 then flash unit with CID52 flashfiles from DBSS support site.

b.r.

97

DreamBox / Dbss 3.3.1

« on: April 17, 2008, 09:27:31 AM »

Dbss 3.3.1 --------------------------------------------------------------------------------

Dear users,
We are pleased to announce a release of new versions of DBSS v3.3.1

In this update:
"New CID" option for Execute "Security Bypass" Operations.

This option is meant for those users who repaired/unlocked K310/K320/K510/W810 phones before the support of these models was officially added in DBSS 3.3. To ensure correct update process by means of SEUS, just set CID=50 in these phones.

DreamBox – get more with it.

b.r.

98

Smart-Clip / My step by step V3x "bootloader only" flashing procedure with smart moto

« on: April 16, 2008, 12:25:00 PM »

Just want to share my flashing procedure for V3x bootloader only.You can also use this for unlocking via prepare phone and repair pds operations.




1.disassemble phone, locate tp location, solder jumperwire



2.now open smart moto
3.connect USB cable
4.connect testpoint to ground (i use unit vibrator as ground connection)
5.insert battery and put rubberband for support



6.press search tab on smart moto then connect phone battery.



7.smart moto should detect "S blank neptune lte" OR "s blank paragon POG", or s blank rainbow POG"
8.After unit is detected by smartmoto disconnect testpoint
9.Now phone is for flash/repair operations

Smart moto flashing:

1.After unit is detected via tp




2. tick flash tab on smart moto




3. tick enter flashmode tab, wait after unit is prepared for flashing by smartmoto




4. tick browse tab and select flash file




5. After flash files are loaded tick write flash tab wait until flash operation finishes.





note: if you encounter "clip communication failed" or "i.o. timeout" just restart pc, then repeat process again.

Hope this will be useful for others.

my test point pics:



Cable is from old damage k750 cable which has tp cable. I also use it for  703sh and 903sh which requires tp procedure for flash / unlock purposes.

b.r.

99

DreamBox / W200 glue removing & unlock repair videO

« on: April 16, 2008, 05:16:59 AM »

Here's working link Bros..............



b.r.

100

Multi-Box TEAM Products / N95 Done Via Infinity Thur Pad Finder Box

« on: April 15, 2008, 02:06:44 PM »

Nice reference Sir.....

Pad Finder Box very useful for hard to find pinouts.......


b.r.

101

Motorolla Hardware Section / Need c139 P.A. jumper solution

« on: April 15, 2008, 09:59:46 AM »

Bros anybody have C139 p.a. jumper solution. thanks in advance.

b.r.

102

Universalbox Dongle / To all UB user

« on: April 15, 2008, 09:58:54 AM »

To all UB user,

Please press "ONLINE UNLOCK" button , instead of "UNLOCK" button for the most of bb5 phone

Unlock button only work for below model

6630
6680
n70
n90

Supported BB5 Units For Online Unlock:

RM-274 3109C
RM-237 3110C
RM-38 3250
RM-272 3500C
RM-257 3555
RM-174 5200
RM-181 5200b
RM-146 5300
RM-147 5300b
RM-303 5310
RM-86 5500
RM-242 5610
RM-230 5700
RM-302 5700b
RM-198 6085
RM-188 6086
RM-260 6086
RM-122 6110N
RM-243 6120C
RM-178 6125
RM-115 6131
RM-199 6136
RM-200 6151
RM-145 6233
RM-123 6234
RM-207 6263
RM-210 6267
RM-56 6270
RM-78 6280
RM-268 6288
RM-176 6290
RM-222 6300b
RM-222 6300B
RM-217 6300
RM-322 6301
RM-265 6500C
RM-240 6500S
RM-289 6555B
RM-57 6681
RM-58 6682
RM-70 7370
RM-209 7373
RM-140 7390
RM-249 7500P
RM-264 7900P
RM-164 8600
RM-233 8800
RM-170 E50
RM-171 E50
RM-244 E51
RM-49 E60
RM-227 E61i
RM-89 E61
RM-88 E62
RM-208 E65
RM-10 E70
RA-6 E90
RM-112 N71
RM-67 N71
RM-180 N72
RM-132 N73
RM-133 N73
RM-128 N75
RM-75 N75
RM-135 N76
RM-149 N76
RM-194 N77
RX-34 N800
RM-92 N80
RM-223 N81-3
RM-179 N81
RM-223 N81
RM-313 N82
RM-158 N91
RM-43 N91
RM-100 N92
RM-156 N93i
RM-157 N93i
RM-153 N93
RM-55 N93
RM-320 N95-8GB
RM-159 N95
RM-160 N95
RM-245 N95
RM-320 N95

b.r.

103

DreamBox / DBSS v3.3

« on: April 15, 2008, 05:32:39 AM »

DBSS v3.3.

--------------------------------------------------------------------------------

Dear users,
We are pleased to announce a release of new versions of DBSS v3.3

In this update:
Enabled support for DB2012 platform (CID 50) of the following Sony Ericsson models::
K series: K310, K320, K510;
W series: W810.
Repair "5 Locks Closed" and "Red Blinking". "Security Bypass" mode required.
Standalone permanent unlock by Testpoint."Security Bypass" mode required.
Multiflash FOTA/Main Firmware/File System using DCU-60 cable.
Read/write full flash."Security Bypass" mode required.
Read/write GDFS.
Phone customization.
Change CDA.
Read phone info.
Read phone internal diagnostic log.
Reset Call Timer.
Starting form this version of DBSS V3.3, the flashing of any handset doesn’t depend on flash file CID version. The phone can be flashed with flash file of any CID version. "Security Bypass" mode required.
DreamBox – get more with it.

NOTE
To enter "Security Bypass" mode on DB2012 platform the correct GDFS structure and configuration is required.

Official Web Site - http://www.dreambox.hk
__________________


b.r.

104

New Member's Lounge / newbie

« on: April 14, 2008, 12:42:14 PM »

Welcome here Kabayan..........

b.r.

105

New Member's Lounge / from tuao, cagayan valley! philippines

« on: April 14, 2008, 12:41:28 PM »

welcome here Bro....


b.r.