VolcanoBox 1.9.6 Grand Update Added SonyEricsson Xperia & Coolsand & Alcatal & More

[kanniappan]

VolcanoBox 1.9.6 Grand Update Added SonyEricsson Xperia & Coolsand & Alcatal & More                                                                            

We are Happy to Announce Grand update

click here full installer  


Volcanobox 1.9.6  

Whats new ?

1- Added SonyEricsson Xperia phones for Unlock

Here is list

    x10
    x10i
    x10a
    SO-01B
    E10i
    U20
    X8
    E15
    W8
    E16
    E16i
    LT15
    MK16
    MT11
    MT15
    R800
    SK17
    ST15
    St17
    ST18
    WT19
    Z1
    SO-01C
    SO-01D
    SO-03C
    S51se
    LT18


Keep in mind New Security is not supported !!  

How To Unlock SonyEricsson Xperia Phones

1st of all you need to install drivers

How to install drivers ?

    Go to Volcanobox\Drivers\SonyXperia
    If you have phone which can be done without TP then open  NON_TP_Drivers and install drivers OR if you have phone which can be  done with TP then open TP_Drivers and install drivers
    we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
    Remove battery from phone and insert it again
    Make sure phone is Turned off condition
    Press & Hold “back Button” from phone
    While holding “Back Button” from phone insert/plug Usb cable into phone
    Windows will ask you for drivers. If it’s not install auto then give  path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
    Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
    As your mobile powered up Go to settings , Application , Enable “Usb  Debugging” ( in some phones USB debugging have in different location  for example you need to go in settings, Application, Development, or in  some phone setting, Development, )
    After Enable Usb debugging connect usb cable to you phone and let  it’s install drivers if not driver not install then give path of drivers  from Volcanobox folder.
    As it’s complete you are ready to Unlock your phone.



As Drivers installed you can Start Unlocking  

    1. Open VolcanoBox and click on Xperia
    2. Make sure There is no Simcard in your mobile
    3. Make sure SD Card ( memory card ) inserted in the phone
    4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
    5. Make sure your phone is NOT rooted
    6. Make sure your phone not have any Custom rom
    7. Make sure your Internet Connection is work good and Firewall is turned-ff
    8. Make sure Usb debugging mode is enabled
    9. Make sure your Antivirus is turned-off
    10. Cllck on Get Info from VolcanoBox software
    11. Remove Battery and insert it again
    12. Press and hold Back Button
    13. Insert Usb cable while holding Back Button from phone
    14. If everything ok you will get info about your phone
    15. Now Click on Unlock
    16. Repeat operation from 8 to 10
    17. When software Ask you Remove Usb cable, complete power on your  phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
    18. Wait till software complete it’s operation.
    19. Your phone is unlocked !!



Some Common Problems:  



Unlock Not OK or Not Detecting Phone?  
Possible causes:

    1. On Vista or Windows 7 32/64 Bit Windows, VolcanoBox must run as  administrator (right click , select "run as administrator")

    2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.

Phone shows no service after unlock:

    1. Remove Battery and wait 1 minute. Insert Battery and power on phone.

Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again

TEST Point pictures & this Detailed manual already inside your  volcanobox. just run volcano click on Help Manual button right after  connect button. then click on How to Unlock Xperia Phones. you will see  all details.

2- Coolsand Read / Write / Format More Stable then ever

Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.

Now Coolsand have two different Boots

1- built-in Auto
2- built-in BOOT_B


2- Built-in Boot_B  
is fully Auto you don't need to select any thing. just make sure you  have selected Boot_B from Boot and Auto from Flash id. if you want to  format also you don't need to write any format address. We had tested  lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You  can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm


1- Built-in AUTO  
This is Auto and Manual both. if you select Auto from boot and Auto from  Flash id it will work auto. but if somehow you want to do manual work  then you can select Auto from boot and Select your DESIRE FLASH ID from  flash id and you can do work.

This is still BETA we research lot of new things and we are working on  it soon you guys will have Fully Auto and Fully Bugs free ver and Fully  Supported coolsand phones. At the moment we support maximum cpu and  maximum flash id which still other not do.



3- Coolsand Read USER Area  
4- Coolsand Write USER AREA


Read & Write User Area is for repair signals in coolsand phones,  Read & Write user area is for repair Usercode problems in Coolsand  phones, Read & Write user area is for repair blinking problems, in  other words read & write user area is very use full. in other words  you can say it's NV. but it have more than NV area  



5- Added Write Flash Security for Coolsand  


1. In COOLSAND BOOT_B you try to write any file and volcano say to "you  Writing this file is risky" This mean your readed flash is not good and  volcano will not write your flash file. this is for avoid after write  flash mobile dead. if you still want to write this flash file you can  use built-in AUTO and select your desire flash id Volcano will write  flash file but not sure your mobile will come alive or not or your  mobile become dead.  






6- Added More Manuals in Volcano box      
7- Adjust Coolsand Find pass algorithm
8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )

here is list


    OT-S600  
    OT-S710
    OT-S800
    OT-J610
    OT-S500
    OT-S810
    OT-S820
    OT-S850

click here full installer