volcano box main setup

[sahassan82]

VolcanoBox 1.8.9 New Easy Gui - World's 1st Qmobile E995 - Spice M6900 - MTK Andoird

Download Link : VolcanoTool_v1.8.9.rar



What's New ?

◄ MTK Android NAND and EMMC Read flash improve speed
◄ Added MTK 6235 Nor flash Write/Format
◄ Optimize MTK Format
◄ Optimize Coolsand Read flash Auto identify size

Special GIFT for ALL VOLCANOBOX USERS

World's 1st Original Flasher + Flash file for repair DEAD PHONES Public Release !!

QMobile E995 from Pakistan
Spice M6900 from India

We can add these phones into volcanobox but we don't have samples to for Research & Development. As these phones can't be repair of any box yet. i don't know why other can't do. We can do we just need samples. These Files are not Shared before in forums or any in public place so We decide to release it so our Users can Repair their phones easily.

Contents inside Folder...

Folder name : QMobile E995 & Sprice M6900

inside two folders : E995_two_vers_inside and SPICE_M6900_IND_VER11_0

inside SPICE_M6900_IND_VER11_0 : FlashTool_v5.1112.00 this is flasher
inside SPICE_M6900_IND_VER11_0 : TINNO36_10A_GEMINI_PCB01_gprs_MT6236_S00.SPICE_M69 00_IND_VER11_0.bin This is Flash file

inside E995_two_vers_inside : E995 MR1 SW 190112 this is MR1 ver software
inside E995_two_vers_inside : E995_MP2_060212 this is MP2 ver software

inside E995 MR1 SW 190112 : FlashTool_v5.1112.00 this is flasher
inside E995 MR1 SW 190112 : TINNO36_10A_GEMINI_PCB01_gprs_MT6236_S00.E960_MP_F 1_PK_01_18.bin This is Flash file

inside E995_MP2_060212 : FlashTool_v5.1112.00 this is Flasher
inside E995_MP2_060212 : TINNO36_10A_GEMINI_BOOTLOADER this is Flash file

so this is complete package i upload for ALL VolcanoBox users. This is only For Qmobile E995 & Spice M6900. This only help you if after write flash file mobile dead. you can simply flash these file according to your mobile and your mobile will alive and working fine. !!

Qmobile E995 & Spice M6900 is SAFE to format with Volcanobox. your phone will not damaged at ALL. In these phones one major problem came that it's can't send SMS or can't open inbox or can't open WRITE SMS folder. Do not flash etc... just read general parameters and save it some where this you must need to do. make auto format. after format your phone will ok and alive but your phone will say invalid imei. you just write back General parameters. your phone will be 1000% ok and alive. problem came when Users write flash to this type of problem. and they got phone dead. Every These type of error can be solve with just FORMAT but before format must read GENERAL Parameters and save it in safe place.

You can download QMobile E995 & Sprice M6900 Flashers & Flash file from here

Hotfile.com: One click file hosting: QMobile E995 & Sprice M6900.rar

md5: dc00b73982a9e215d508795fab63fbcb

Download Link : VolcanoTool_v1.8.9.rar

[sahassan82]

VolcanoBox 1.9.0 World's 1st Coolsand CPU ID - MTK Android 4.0.9 Imei Repair & More..

Download Link : VolcanoTool_v1.9.0.rar



VolcanoBox 1.9.0

Whats new ?

World's 1st Automatic recognition of CPU ID coolsand
Coolsand increases the recognition of some new flash type
SPD6530 automatic reading 32M
MTK 65xx Android 4.0.x Imei repair.

Details :

Now VolcanoBox can detect CPU ID from any of phones. whenever you will readinfo you will see log like this.

please press Power on/off button.  
  CPU ID: 880A 7002
  Flash ID : 00C84016
  Flash Type: SF_GD25Q32                
>>Flash Len :0x400000(4M)

CPU ID: 880A 7002

This is Mobile CPU ID. now this is very important whenever you read flash always save file name with CPU ID and FLASH ID and FLASH TYPE and Flash Len. on next upcoming update we will do Auto. you will not have to Write name with your keyboard. so Now this problem solved that Same phone have different Cpu now no need to open just read info and you can know what cpu is inside. for example

CT1130/1131 is 8806
CT1129D is 8808
CT8851A is 880A ( not confirmed )

Once you use you will know which CPU ID have which CPU. and please collect all details that which cpu id have which cpu and post in it one thread.

MTK 65xx Android 4.0.x Imei repair.
Details:

Mostly All MTK65xx Imei repair can be done with Volcano Box !!

Today we have tested QMobile A8 MTK6577 4.0.4 which was not repairing imei before but now it can !! Also we have tested Clone Iphone 4s MTK 6573 4.0.9 Both imei repair done !!!!

how to do it ?

1st of all. Try to repair imei
if success then Good otherwise read more...
if failed then go to
C:\Program files\VolcanoTeam\Volcano Box\Documents & Help\Samsung Modem Dump\Samsung Root\SuperOneClickv2.3.3-ShortFuse.rar
Extract it
open it
click on Root
check if it's saying your phone is already rooted.
if it's saying then download Super User from Google play
run it.
close it
plug usb and repair imei it must be done.
if it's not saying thta your phone is already rooted
then let it root. if success then repair imei
if still not success then find some root software and root it
after root your phone imei will be repaired !!

I am Collecting All possible root softwares and i will give it to you in next upcoming updates...

Special Thanks to alpesh_12345 for testing with me Clone Iphone 4s 4.0.9

Download Link : VolcanoTool_v1.9.0.rar

[kanniappan]

 
 
 
 

VolcanoBox 1.9.2

Whats new ?

Worlds 1st Mstar Flash for unlock !!
Coolsand detection/Pinfind Solved !!
MTK6250 flashing update

Click here to Download


Details :

What is World's 1st Mstar Flash for Unlock ?

 Some Mstar phones come to you shop with usercode. you try to read flash  and read it's code. you tried but all codes given by Software is  incorrect. You plug other boxes and read codes from all boxes and All  boxes given codes you tried but all of them are not working. Mobile says  Incorrect code. Now you have only 2 ways left !!

1- You search for flash file
2- you search for same working phone

 1- you search for flash file. you waist your important time in search  and download and flash your phone. after all results is all available  files are completable with your phone. you tried lot of Flash files.  some files results is your phone power on but on your phone White  screen. some Flash file results is your phone is dead and so on.

 2- You search for same working phone. you waist lot of your important  time for search same phone in market and you didn't get. if you get you  read flash and write on faulty phone result is phone not power up cause  of Flash ic difference or LCD white or keybaord not working fine and so  on

SO WE RELEASE FLASH FOR UNLOCK OPTION IN MSTAR

 what you need to do is. simply read flash of your faulty phone by  clicking READ FLASH then click on Flash for unlock and click on run. it  will ask you for file give path of your read flash and it will start  writing.after writing your phone code will be removed !!

This  is World's 1st and unique Solution for those M-star phones which Show  Wrong code after you read code from all Chinese boxes. !!

 i don't want to write name of boxes and phone model name which we test.  cause of i don't want bla bla.... i am not in Fighting mode

VolcanoBox ver 1.9.2 have firmware update !!!!
 when you run it 1st time. do not attach any phone with volcano box.  also make sure your pc will not shut down or your will not have  Electricity failure...

[kanniappan]

Volcanobox 1.9.5 More Stable for Coolsand - SPD new Flash ic -Tutorials added in Soft      

 
whats new ?
 
 Adjust Coolsand new Boot B for Read Flash.
Adjust Coolsand new Boot B for Write Flash.
Adjust Coolsand Find Password Algo.
Added SPD 6610 new IC supported.
Added Manuals/Tutorials to volcano Soft
 
 
This is more stable ver for Coolsand. Let me explain you fews things.
 
Because Volcano Box is a very advanced and professional tool, it's needs  few important tips to get used to and understand it's full potencial.  We have decided to put a detailed manual in software. so all can just  click and see how to do it .
We will update our manuals on every update so one day all will be in software. this will be too much easy for all of you guys.
 
check out this GIF
 
 
 
 
We introduced Coolsand boot B. This is Totally Automatically. you just  have to select BOOT_B and Auto from flash type: this is still in beta.
 
check this gif.
 
 
 
 
 Click here to download
 
 !! Sonyericsson Xperia Unlocking is ready. Contact me privately for Beta Test !!
 
 
 

[kanniappan]

VolcanoBox 1.9.7 MTK Android New Boot V7.1304Supported More Flash SPD 6530a new Flash      
 
 
VolcanoBox 1.9.7
 
Whats new ?
 
 

• MTK Android added new Boot V7.1304 ( more flash id is supported )
  
• Adjust MTK625A Write Flash
  
• Solve MTK Android Read and Write break-off
  
• Solve SPD6530 Read Flash bug
  
• Solve Coolsand Find Pass bug
  
• More Stable for SPD6530a Cpu !!
[/COLOR]

 
 
 Click here to download
 
 

[kanniappan]

 

[kanniappan]

World's1st VolcanoBox1.9.9SPD Android Imei,MTK Android Root,MTK Android Custom file:)      
 
 
 VolcanoBox 1.9.9
 
Truly World's 1st
 
 ▬● Truly World's 1st  ALL MTK ANDROID ROOT (beta)
▬● Truly World's 1st MTK ANDROID CUSTOM AREA WRITE FLASH
▬● Truly World's 1st MTK ANDROID CUSTOM AREA READ FLASH
▬● Truly World's 1st SPD ANDROID IMEI REPAIR
▬● MTK6253 decryption
 
 
 How to Root Any MTK Android phone ?
 
 1-      Set pinouts or detect pinouts
 2-      Go to mtk tab
 3-      Select Boot Built-in-Boot-12
 4-      Click on read info
 5-      Untick auto pinfind
 6-      Make sure your phone com port selected
 7-      Click on run
 8-      Read carefully BOOTIMG address
 9-      Click on Read Flash
 10-   Write BOOTIMG ADDR into Start Address ( without 0x )
 11-   Write BOOTIMG length into Flash Size ( without 0x )
 12-   Click on reset pinouts
 13-   Click on run
 14-   Save file
 15-   Go to Tools
 16-   Click on One-key Root
 17-   Click on Select Open
 18-   Select your read file of BOOTIMG
 19-   Click on Convert
 20-   Go to MTK tab
 21-   Click on write flash
 22-   Select Built-in-Boot-12
 23-   Select Converted File
 24-   Write BootIMG ADDR into START ADDRESS
 25-   Click on Reset pinouts
 26-   Click on write
 27-   After writing Your phone will be ROOTED !!!!!
 
 
 
 How to Read and Write Custom/Specific Area File to MTK Android ?
 
 1-      Set pinouts or detect pinouts
 2-      Go to mtk tab
 3-      Select Boot Built-in-Boot-12
 4-      Click on read info
 5-      Untick auto pinfind
 6-      Make sure your phone com port selected
 7-      Click on run
 8-      Read carefully BOOTIMG address ( or your desire area address )
 9-      Click on Read Flash
 10-   Write BOOTIMG ( or your desire area address ) ADDR into Start Address ( without 0x )
 11-   Write BOOTIMG ( or your desire area length ) length into Flash Size ( without 0x )
 12-   Click on reset pinouts
 13-   Click on run
 14-   Save file ( your desire area file read done )
 
 
 
 Now how you can write ?
 
 1-      Set pinouts or detect pinouts
 2-      Go to mtk tab
 3-      Select Boot Built-in-Boot-12
 4-      Click on write flash
 5-      Select Your desire File
 6-      Write BootIMG ( or your desire area address )  ADDR into START ADDRESS
 7-      Click on Reset pinouts
 8-      Click on write
 9-      Your desire File write done !!
 
 
How to Write SPD Android imei ?
 
1- goto detect tab
2-select spd from list
3-attach phone
4-click on detect tab
5- press detect (keep in  mind where is D- and D+ gnd)
6- clear pinout
7-close volcano
8- again open volcano
9- mobile connect with volcano jig but volcano phone cable remove to volcano
10- go to detect tab select spd
11- select d-, d+ and gnd manual  and set pinout(where it's detect before)
12- go to spd tab
13- R/W IMEI chooses com
14- untick auto detect pinout
15- press these key from keybord to enable imei alt+ctrl+i
16- select boot 6530
17-click on write imei
18-click run
19-new window will be open
20 -choose usb
21-write imei in box
22-click on write imei
23-then connect volcano jig cable jack in volcano
 
 
 IF WRITE IMEI WITH USB CABLE DISSCONNECT USB + SUPPLY VCC WORK WITH ONLY THREE WiRE  D+ D- GND
 
 if write imei usb with usb cable and boot key  mobile, dissconect usb + supply (vcc)
usb cable connect only D+  D-  GND  
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-click on write imei
11-then connect  press mobile boot key and inseri usb(connect only three  wire usb D+ D-  GND   VCC +SUPPLY NOT CONNECT)  AFTER 10 15 SEC YOUR  ANY SPD IMEI WRITE
 
 Imei changing is illegal – imei repairing or changing is only for repairing original only !!
 
 Click here to download Video
 
 
 [ame=http://www.youtube.com/watch?v=SBQmZsiZY7w]World 1st Volcanobox Root Every MTK Android and Write specific Area of MTK Android - YouTube[/ame]
 
 
 Click here to download 1.9.9
 
 
 
 

[kanniappan]

World's 1st

ALL MTK 65xx
ALL Android 4.x.x
Invalid Imei repair
Imei NULL repair

1 - !!!! Imei repair with META mode Supported !!!!

No Root
No Flash
No hassle
Just one Click

how to repair imei ?

go to MTK TAB
do Enable imei
click on Android tool
click on Run
click on MTK 65xx New Method
Fill imei in boxes
click on Write imei
when software saying searching for port
Insert Usb cable to phone in powered OFF condition !!
waiting software for process complete
after 2 secs your imei repair


Possible problems :

You Drivers are conflicting
You Drivers port are High like 50~200
You didn't install 2nd time drivers
your 1st time drivers com port is ok but 2nd time drivers com port is high
Wrong Drivers installed
Windows problem

some test reports
VolcanoBox Ver 2.0.0 world's 1st mt65xx 4.x.x imei repaired success BETA TEST REPORTS



Make sure you have Clean pc and Drivers are conflicting.

2 - Detailed VolcanoBox manual updated

Run Volcanobox
Click on Manual Help
Read Detailed volcanobox

Special Thanks to Dipendra Pathak

3 - Adjust MTK Android EMMC flash read, write separate file and get ROOT permission.

4 - Solve some Coolsand phone dead problems after Write flash.

5 - Add 6530 new flash ic supported.

6 - Now we can add any 6530 Unsupported Flash ic.
Just send me pm Picture of Flash ic and screen  shot of error on volcano. we will add those unsupported flash ic in next  upcoming updates.





click here to download

[kanniappan]

VolcanoBox 2.0.1

whats new ?


World's 1st Coolsand added new flash ic ( with other failed )
Solved Many Coolsand problems
World's 1st Introduced MTK dul-encryption
World's 1st Added Mstar Flash ic ( with other failed )
World's 1st Added SPD Flash ic ( with other failed )

Click here to download




@ ALL Beta Testers Please REDOWNLOAD IT !!

[kanniappan]

VolcanoBox 2.0.1 Patch
 
Coolsand bug fixed which comes on 2.0.1 yesterday's update !!
 
 
 
 
 click here to download 2.0.1 PATCH
 
what you have to do
 
If you already downloaded 2.0.1 Yesterday update from this link then you just download 2.0.1 Patch and Extract files from Rar file into VolcanoBox 2.0.1 Folder.
 
So you will be solved !!!
 
 
 
 
 
Br
 
Faisal_Computer

[kanniappan]

 
Volcanobox 2.0.2
 
 
 World's 1st
 
 World's 1st Coolsand/RDA 8853c 16 MB Supported Read Correct Flash Boot A
 World's 1st Coolsand/RDA 8853c 16 MB Supported Write Correct Flash Boot B
 
 SF_N25W32                  Read and Write !!
 Improved Coolsand/RDA Read Flash
Improved Coolsand/RDA Write Flash
Improved Coolsand/RDA User Code
 
 Description:
 
Coolsand/Rda Read flash improved. it's strongly recommend Read Flash  again from working phone from Boot_B and Boot_Auto. Save file with both  names like X202 Boot Auto.bin and X202Boot B.bin. like this you will  have rare chance of corrupted flash file.
For 8853c you have to read flash from Boot Auto and Write it from  Boot_B. In next upcoming updates we will make it Auto will not need to  select different boots.
I had seen you guys were have problem in
 
8853A
CPU ID: 880A 7002(CT8853B)
  Flash ID : 002CCB16
  Flash Type: SF_N25W32                  
  Flash Len :0x400000(4M)
 
and
 
8853C
CPU ID: 880A 7002(CT8853B)
  Flash ID : 002CCB18
  Flash Type: SF_N25W128                
  Flash Len :0x1000000(16M)
 
Which we solved and i had tested working super fine.
 
if some how you Flash your phone and it's still dead then you have to  read flash from working phone and write on faulty phone your phone will  be ok. if you don't have Same working phone then test different phones.
 
Some Friend saying coolsand reading and writing Speed is little slow. so  Please select 1843200 from baud rate you will see the difference.
 
if some how read full flash failed with boot b then select boot auto and it will read complete flash file.
 
 Must Watch this Video.. Read Flash full and Write Flash and Mobile not DEAD !!!!
 
Youtube
 
 [ame=http://www.youtube.com/watch?v=-6ZUajhr17Q]VolcanoBox World's 1st Coolsand_RDA 8853c 16MB Flash read_Write done - YouTube[/ame]
 
 Dailymotion for Those Users who can't watch Youtube
 
 
 
 
 
 
 
Click here to download

[kanniappan]

 
 Volcanobox 2.0.3
 
 Whats new ?
 
1.Added These Samsung Models
 
* Support and auto root and backup/restore efs for versions upto 4.1.1
 
* Samsung exynos Flash chip support upto version 4.1.2 No more Damage IMEI After Unlock and auto root up to Version 4.1.1
 
 
 

• GT=I8190 (Galaxy S3 MINI) Safe Direct Unlock/Auto Root until version 4.1.1
  
• GT-I9001 (Galaxy S Plus) Safe Direct Unlock/Auto Root
  
• GT-I9300 auto root and safe unlock until version 4.1.1
  
• GT-I9100 auto root and safe unlock until version 4.1.1
  
• GT-N7000 auto root and safe unlock until version 4.1.1
  
• GT-N7100 auto root and safe unlock until version 4.1.1
  
• GT-N8000 auto root and safe unlock until version 4.1.1
  
• GT-I9000 auto root and safe unlock until version 4.1.1
  
• GT-I9000B auto root and safe unlock until version 4.1.1
  
• GT-I9003 auto root and safe unlock until version 4.1.1
  
• GT-S6102 auto root and safe unlock until version 4.1.1
  
• GT-N7000 auto root and safe unlock until version 4.1.1
  
• SGH-T959 auto root and safe unlock until version 4.1.1
  
• SGH-T959V auto root and safe unlock until version4.1.1
  
• SGH-T989 auto root and safe unlock until version 4.1.1
  
• SGH-I997 auto root and safe unlock until version 4.1.1
  

 and many more auto root and safe unlock until version 4.1.1
 
2.Added MTK Andriod one-key Root
 
3.Adjust MTK Andriod Write flash
 
 
Last 3 updates:
 
 
 
 Volcanobox 2.0.1 More stable ver for Coolsand, SPD & MTK!World's 1st Flash id added
 
 VolcanoBox2.0.0 World's 1st MTK6575 6577 6573 6589 6515 Andrid 4.x.x Imei repair META
 
Click here to download
 
 
 
 

[kanniappan]

VolcanoBox 2.0.4
 
 Whats new ?
 
 
 World's 1st Coolsand 16MB Imei Repair
  World's 1st Coolsand 16Mb Flash ic Supported SF_GD25LQ128
  Adjust MTK6250 Imei Change
  Adjust MTK Android Read Flash bug
  Adjust MTK 6253 Write Flash
  Solve SonyEicsson ST18 bug
  Adjust SPD imei tool
 
 Click here to download
 
 
 

 

BR
 Qaisar Mahmood

[kanniappan]

Before i sTaRt
A Very Special Thanks to
MobileClinic
 
VolcanoBox 2.0.5
Ultimate Indian's Version
 
World's 1st Karbonn A1+ Format Supported
World's 1st Karbonn A1+ Wipe Supported
World's 1st Added SPD Andriod Imei New Method
Added SPD 6800H Write NV



Before i sTaRt
  A Very Special Thanks to
  MobileClinic
 
 VolcanoBox 2.0.5
  Ultimate Indian's Version
 
 World's 1st Karbonn A1+ Format Supported
 World's 1st Karbonn A1+ Wipe Supported
 World's 1st Added SPD Andriod Imei New Method
 Added SPD 6800H Write NV
 
 
 
 How to Imei Change SPD CPU with New Easy Method?
 
  1-First select Detect tab
  2-select CPU RX-TX SPD CPU
  3-click detect button
  4-tick after setting switches to Platform  
  5-setpinouts
  6-tick imei repair New Method
  7-click Run
  8-New window open
  9-select port
  10-Select imei type
  11-Fill imei No in Imei tab
  12-click Start
  13-then Show Please Connect phone
  14-press power button
 
 
 
 Karbonn A1+ Format Video :


Karbonn A1+ Imei Repair Video :
http://www.youtube.com/watch?v=Ek-6Tf4ewwc&feature=player_embedded

Click here to download
Click here to Download Media Fire ( uploading please wait .... )

GSMSP | Online Hard Discount

[kanniappan]

World's 1st read recovery file
 World's 1st Extract Recovery bin file
 World's 1st Edit Recovery Bin File
 World's 1st Repack Recovery bin
 World's 1st MTK Direct Privacy Code Read
More detail

VolcanoBox 2.0.6
 
 !! World's 1st !!
 
 Watch in HD !!








World's 1st read recovery file
 World's 1st Extract Recovery bin file
 World's 1st Edit Recovery Bin File
 World's 1st Repack Recovery bin
 World's 1st MTK Direct Privacy Code Read


Click here to download
Click here to download from Media Fire ( uploading... )
 

Some Details :
 
How to read Privacy password ?
 
Simply Read Flash file. Right after flash file read. Save it. Check logs you can see Privacy code !!
 
 How to read Recovery Bin ?
 
Detect phone from Detect tab
Set pinout
go to Mtk tab
Select Boot 12
Click on One-key Root
Untick Auto Detect Pinout
From options Select Recovery
Select Run
Write file name and click on Save ( Recovery.Bin )
Wait... let it complete
 
you will have file where you save !!
 
 How To Extract & Repack Recovery Bin File ?
 
Go to MTK Tab
Click on One-Key Root
Untick Auto Detect Pinouts
From options Select Boot&Rec Tools
Click on Run
New Windows will open
Click Select Open
Select Your readed Recovery Bin File
Click on Split file
 
Now you have Extracted Recovery Bin File
 
Go to Same Folder where you had save Recovery Bin file
You have Folder there now you can edit files... After editing now
 
Click on Merge File
 
Now you have Custom/Edited Recovery Bin file and Ready to Flash !!!
 
For reference you can see Video ...