Another Succesfully unlock Docomo M702iG
here is screen shots
How to unlock ?
# Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
# Connect S-Card to PC USB port.
# Connect power supply to Smart-Clip and power on the handset.
# Launch SmartMoto.
# Choose "Smart-Clip USB port" in phone connection window.
# Press "Search". The software should perform the following steps:
* SmartMoto detects S-Card;
* SmartMoto detects Smart-Clip;
* SmartMoto detects the handset and reads all phone information.
# Log to bookmark “Prepare”
# Select an appropriate model from the list.
# Mark “Unlock automatically” and press “Prepare Smart TestPoint” button.
# Prepare operation is in progress. The handset gets reloaded, backup of firmware is saved.
# SmartMoto pops up the message requiring Smart TestPoint cable to be connected. Please perform the following:
* Disconnect the handset and dismantle it
* Connect Smart TestPoint cable to the port RJ45 on Smart-Clip
* Connect data cable to the phone
* Connect battery hook to the positive (+) battery contact on PCB
* Connect needle A to the primary TestPoint A and hold it until the software informs that it can be disconnected
* Press OK in SmartMoto. The handset should be detected with boot version 0.00.
# Unlock procedure continues.
# Disconnect TP needle when SmartMoto informs to do so.
# If the option "Unlock automatically" was marked – the handset becomes unlocked. If the option was not selected then the handset can be served for Flash, Repair PDS, Unlock or Backup purposes.
Br
maxie;)
