Via prepare- Repair PDS and Flash!!!
SmartMoto 3.12
S-Card: XXXXXXX Smart-Clip dongle, v 2.07, assigned Smart-Clip: XXXXXXX Europe, initializing... OK
Clip serial: XXXXXXXX , version: 4.07, initializing... OK
Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 8.D5
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... ST - M30L0R8000B0
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54x,V55x,V62x,V635,V80
Hardware IMEI: 3540800XXXXXXXX
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE 3540800XXXXXXXX.mbk"
Unlocking phone... OK
To get phone to work, you should write flash into the phone
Login request... OK
Writing flash section 4 of 4... 100% (12.2 Kb/sec)
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
IMEI OTP status: locked
Repair PDS request... OK
Performing PDS repair... OK
Writing flash section 1 of 1... 100% (17 Kb/sec)
Please write a corresponding Full_flash file to phone to complete repair
Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 8.D0
Boot prepare... failed
Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 8.D0
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... ST - M30L0R8000B0
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54x,V55x,V62x,V635,V80
Hardware IMEI: 3540800XXXXXXXX
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE 354080016057915 (1).mbk"
Unlocking phone... OK
To get phone to work, you should write flash into the phone
Writing flash section 2 of 2... 100% (42.6 Kb/sec)
Turning phone off... OK
Flash completed!
