here is the procedure
q:
which s1 android based phones i can unlock using alternative security bypass ?
a:
you can use that method for
x10i,x10i,s0-o1b, e10,e15,e16,u20 phones.
lt15,mt15,r800 and other msm8255-based phones require very simple testpoint to perform alternative security bypass.
q:
how to unlock s1 android based phones using alternative security bypass ?
a:
Here is procedure.
1.
make sure you have firmware with android 2.x, NOT 1.6.
firmware 2.3 is NOT supported, downgrade to 2.1.
flash required firmware, if needed.
2.
power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging"
connect phone to PC, install drivers from setool2 distr ( drivers\ADB_Drivers)
hint:
i suggest to import DisableADBNumbering.reg, however that is not required.
3.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
press unlock
when prompted, detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.
after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.
DO NOT DETACH PHONE FROM CABLE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
possible problems:
you getting "err: 00000005","err: 00000002" during process.
solution:
disable antivirus, especially if you using "koshmarsky antivirus", i recommend Doctor Web
do NOT run setool2 from restricted accounts.
do NOT run setool2 from read-only media.
problem:
it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot
solution:
IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.
if not, well, repeat from start.
