K530i unlock done via create rest file w/ guide

[kungpaoski]

Phone: K530i Smart Locked

- identify first using Dcu-60 usb cable
  to know if rest file and bypass package is available for  
  patch/unlock



- in identify logs rest file is not present so what do you do now?
- you can go to support and download rest file for your phone or you create one for your phone.
- what you need Main fw ver of your phone. ( must be same CID ver. and Firmware ver. ) If you don't same Fw. download it from support. Follow my screen shots.

Restoration file creation



Identify again after operation is finished



-Now restoration file is present
-You can now proceed to patch/unlock the phone
- In settings tab put check signmode, enable alternative security bypass, enable preloader security bypass
- Now go back to sony ericsson tab
- Tick unlock/repair tab
- Press and hold "c" key and connect Dcu-60 usb cable

- Now SETool will inject executor sa fone...

- Once SETOOL tells you this:>>> DISCONNECT PHONE NOW INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS... Press STOP...

- We will not be installing drivers for Modem for CSCA to save time.

- Here get ready with your Test SIM card or the SIM card phone is locked to where you can put the fone in PHONE-MODE (where you can access the Menus)

- Remove Fone>Insert SIM>Turn unit ON>Go to Menu>File Manager>Games> Run EXECUTOR (Menu structure may differ on some SE Models, Just search for EXECUTOR file and RUN it.)

Now your fone is DEAD....

But not for long.....

- go to setool settings tab and put check only USE PRELOADER SECURITY BYPASS.



- go back to sony ericsson tab and tick unlock/repair tab and connect dead phone while pressing "c" key to usb cable.

wait for unlocking operation to finish.........

Now phone is Alive and patch/unlocked.





b.r.

[sveeramani]

thanks sir