W156, W160, W161, W175, W175g, W177, W180, W181, W230, W270 flashing procedure

[sundar]

• Connect SCout/S-Card and Mini USB data cable to PC USB port and launch SCout flasher.
• Log to the tab "Compal"
• Choose an appropriate "Phone group" from the list.
• Press "Browse" to locate required flash file and press "Flash selected phone".
• SCout will inform "Connect phone with battery at least 40% charged".
• Connect data cable to the powered OFF phone with inserted battery.
• With the first phone connect, the SCout will automatically (no user intervention is required during the installation) install "Locosto flash interface" driver and display the following message: "reconnect phone and try again". Please follow the instruction and press “Flash selected phone” again.
• The flashing process starts. At this stage the software may display the message: "Remove and insert back the phone battery". If the message appears, please follow the instruction.
• The flashing process continues.
• Message "Flash completed" informs that process is finished and the phone can be disconnected. [/FONT][/COLOR][/FONT]