Author Topic: How To Update Samsung Using USB Cable  (Read 7953 times)

kanniappan

  • Administrator
  • Hero Member
  • *****
  • Posts: 9780
  • Karma: +12/-0
    • View Profile
How To Update Samsung Using USB Cable
« Reply #15 on: September 26, 2013, 07:23:15 PM »
How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher


Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.
- Run Odin.exe
- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.
- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5
For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_  user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.
- Now click on PDA button at Odin's window and select the above firmware file.
- Put the battery into your phone, But do not turn it on.
- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.
- Release both keys and press Volume Up key to be in Download Mod



Firmware t999:::

T999UVDLJA / TMBDLJA USA T-Mobile






Firmware t999v:::

T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile
- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity
- T999VVLDLL1 / YVLDLL1 VTR Canada Videotron






Flasher:::

Odin307 - Download - 4shared        

PLEASE DON\'T SAY THANKSJUST PRESS BUTTON[/

Srimeenakshimobiles

How To Update Samsung Using USB Cable
« Reply #15 on: September 26, 2013, 07:23:15 PM »

kanniappan

  • Administrator
  • Hero Member
  • *****
  • Posts: 9780
  • Karma: +12/-0
    • View Profile
How To Update Samsung Using USB Cable
« Reply #16 on: September 26, 2013, 07:29:14 PM »
How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher


Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.
- Run Odin.exe
- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.
- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5
For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_  user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.
- Now click on PDA button at Odin's window and select the above firmware file.
- Put the battery into your phone, But do not turn it on.
- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.
- Release both keys and press Volume Up key to be in Download Mod



Firmware t999:::

T999UVDLJA / TMBDLJA USA T-Mobile






Firmware t999v:::

T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile
- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity
- T999VVLDLL1 / YVLDLL1 VTR Canada Videotron






Flasher:::

Odin307 - Download - 4shared        

PLEASE DON\'T SAY THANKSJUST PRESS BUTTON[/

kanniappan

  • Administrator
  • Hero Member
  • *****
  • Posts: 9780
  • Karma: +12/-0
    • View Profile
How To Update Samsung Using USB Cable
« Reply #17 on: September 26, 2013, 07:31:03 PM »
How To Update Samsung S5222 Star 3 Duos Firmware Using USB Cable And FlashTool

 
Firmware Update Steps:
- Turn your Samsung S5222 off, And take its battery, SIM cards, And MMC card out.
- From the flasher folder run FlashTool_E2 exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so  for each file.
- The selecting of firmware files must be in the below order:

- S5222xxxxx_psi.fls
- S5222xxxxx_slb.fls
- S5222xxxxx_bin.fls
- S5222xxxxx_cds.fls
- S5222xxxxxx.dffs

- Now Check these settings:

Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.

- Now you can click on Next button, And a new window will appear.
- Click on Start USB1 button.
- Now you have to connect your Samsung S5222 to PC using the USB cable.
- There are more than one way to connect your phone, You can try any one of the following:

1- With the phone's battery in, Press and hold Home key then connect the USB cable to it.
2- With the phone's battery in, Press and hold Volume Down + Volume Up keys, Then connect the USB cable to it.
3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.

- After the FlashTool starts the update process you have to wait for some minutes.
- When the operation is done, You will see a Success word, And that means it was done right.
- Disconnect the USB cable from phone.
- With your Samsung Star 3 Duos on

FlashTool_E2:::::::Hotfile.com: One click file hosting: C3750_C3650_FlashTool_E2_XMM2150.rar

firmware:::
S5222 Star 3 Duos
- S5222XELC3 Russia
- S5222XELL1 Russia
PLEASE DON\'T SAY THANKSJUST PRESS BUTTON[/

Srimeenakshimobiles

How To Update Samsung Using USB Cable
« Reply #17 on: September 26, 2013, 07:31:03 PM »

 

SimplePortal 2.3.7 © 2008-2025, SimplePortal