Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - SMMobiles

Pages: 1 ... 1417 1418 [1419]

21271

Front page / Martech XC1 Adapter

« on: August 11, 2009, 05:20:25 PM »

Martech XC1 Adapter

Adapter XC1 for Martech Analyzer it's battery adapter for new released power supply/battery tester from Martech that allows you easy and fast connect any battery for performing regneration procvess, charge, test or discharge batetry. Adapter was created with coolaboration with Martech Team and are fully supported with PB243 device - using dedicated temperature control unit for measure battery temperature while process running to not allow overload and burn battery.

Specification:
- build in temperature control unit for Martech Anaylzer
- cage for battery are easly adjusted to match yoru batteries
- max size of battery tested (cage dimmension): 85mm x 85mm
- max height of battery tested (cage dimmension): 28mm

NOTE: Height as lenght of battery can be bigger that adapter area - int this situation it will be over workign area of adapter. This can happend while testign big batteries as camera unit etc.

http://www.multi-com.pl/index.php/en...ategories.html

21272

Front page / Z3X BOX LG Infineon SGOLD3 tool Update! v1.0.7

« on: August 11, 2009, 05:20:25 PM »

LG Infineon SGOLD3 tool Update! v1.0.7

1. Added support LG TE365.
2. Fixes "connection" bug for KS360 and KC550.
3. Added new files to support area.

http://forum.gsmhosting.com/vbb/showthread.php?t=801212

21273

Front page / Martech Analyzer V00.04

« on: August 11, 2009, 05:20:25 PM »

Firmware v 00.04 has been supplemented with:

- amendments in energy governing PowerDown mode_
- amendments within Discharge Mode
- functions of evoking Lit battery chemistry (Review) in the area of Charging Mode
- Batteries of Lit chemistry are fitted with supervising links work electronics
- Those systems, among others protect the lin ks against their discharging
It is stated that allowed discharging threshold is 3V per one link-
- after exceeding this threshold, the battery electronics disconects the battery exit, which results as a zero voltage of such a battery
Some batteries have got electronics which limits the link possibilities which results strongly lowered initial voltage.
Such batteries are able to stillbe used, they sould only be stimulated in a proper way.

How do the stimulating links functions work?- Reviev in PB243: PB 243 Analyzer as a standard, after detecting too low amperage or lack
of battery, shows the following info:"Too Low Battery Voltage"
"Check Battery Connection"- in case of connecting battery with cramps in incorrect way

or " Discharging Error"Check Battery Settings"- in cas eof coonecting wrong battery type

In a lowe verse of alerts:
"Press Flash to Reviev..."
"Press Esc to exit mode..."
The same messages may appear if we have the battery demanding stimulation
At this point, if we are not sure of correct battery connection as well as correct settings, we press the upper button with a
charging icon (Flash)- and the process of stimulation will start, which is going to be confirmed with a message ""Reviving Process".

The reviving proces take splace until the battery voltage reaches the value of at least 3V/ link with an amperage between the range of 50...250mA.
The reviving process has been qdeveloped due to links security.
After reaching the voltage threshold, the analyzer will conduct the usual charging cycle with the parameters declared in Settings window.
Empirical research show that the whole reviving process is different and it depends on links condition, although it has never lasted longer than 12 minutes.

We advise against the battery reviving using" short connection" method, uncontrolled electricity results in ofen damages of battery chemistry.

Because we owe a limited amount of damaged batteries, we ask for opinions regarding analyzer functioning.
All your remarks as well as suggestions ae welcomed at [email protected] or at a suitable section on our forum

Best Regards
Martech Team

21274