This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Prolevelz
Pages: 1 ... 12 13 [14] 15 16
196
« on: November 09, 2007, 02:33:34 PM »
Even low heat but continuesly exposed to it!the keypad easily expand! It will turn to be like this!
 It was stock for 3days at the drawer even a aircondition room!
So.,,better watch out!
197
« on: November 09, 2007, 11:56:15 AM »
Sgh-E310 Hang up! when it power onn only SGH-E310 you can see! I have disabled the side keys,varistor,mic! no luck! so i have flashed it with full flash file! downloaded at support area of ns pro! Then in flashing tick also the repair mode! after flashing write imei! reveal the real imei at the back of the unit!Then costum reset and E2p reset! Done! I can type now!Works well!
198
« on: November 09, 2007, 10:07:37 AM »
Special Thanks to vermsky!!! Like what i idid at this link! http://srimeenakshimobiles.com/forums/showthread.php?t=1240This method is faster and is less complicated-Drag slider to the right to make an emergency call.-Dial *3001#12345#* then press call-Select Version If firmware (this is not a typo) is 03.12 then firmware is either 1.0 or 1.01. You need to upgrade this to 1.02. If you see 03.14 then you have 1.02 already, you are luckyIf you see 04.01 then you have 1.1.1. A little more patience is needed - Activated phones (locked and not jailbroken)
- Go to Settings -> About to check your baseband and firmware version. Software:iTunes version 7.4.1.2 (I use this and never had problems) 7.5setup tested alsoibrickr versions 0.8 and 0.91 (You will know why later)puttySWUnlockiPhone-klip (This contains PACAY by brasuco for easy Activation and unlock.pxl)baseband-flash + secpack (You will see secpack****.bin in the folder. Just rename it to secpack)Installer-2.63.pxl (sometimes browsing applications in ibrickr times out so I used this instead)Google for all of these. I do not take credit for these apps. They are not mine but they can easily be found all over the internet. Hardware:iPhone dock connect to PC via USBWIFI needed for v1.1.1 onlyand iPhone of course  Turn off the iphone, open itunes and device manager (make sure this is on top). Collapse the USB Controllers part so you can see clearly the driver installed. [FONT="]  [/FONT] Dock your iphone. Once you see the gray apple, hold the power and home keys until the screen shuts off. Release the power button after 1 second but keep holding the home button until you see Apple’s DFU driver installed or at least windows says installing new driver. Go to iTunes and you will see that the phone was detected in recovery mode. Hold the shift key then click restore and select the file I highlighted and wait for the restore to finish.  Once it’s done itunes will show you an error but it’s ok. You should either see the regular activate screen or the yellow connect to itunes triangle. If you see the USB cable with iTunes logo, try it again. If you get the yellow triangle, open ibrickr v 0.91 and click begin downgrade to 1.02 then select the middle option and you’re phone should boot back on the activate screen. - Jailbreaking (I have always used v 0.8 for this method)
Click on free my iphone then once ibrickr is ready, turn off your phone. Take it out of the dock, place it back while holding the home key, let go once you see the yellow triangle again. Just wait for ibrick to finish. Close ibrickr and open it again once you see the activate screen. Now click on applications and follow the instructions there. You should see this screen when it’s done.  Click on Install from PXL file and install unlock.pxl (and Installer-2.63.pxl if you started with v 1.1.1) With ibrickr still open, run (CLICK HERE) activate.bat found in the PACAY folder and wait for it to finish then restart your phone. Go to settings-> general-> Auto Lock and set it to never. Go back to ibrickr’s main screen and click on Files. You will see an iphone on the right side of the screen with directories. Go to usr->bin and upload these files (extracted from baseband-flash):  Note: Once baseband flash is extracted you will secpack41103.bin (not sure of the filename anymore) just rename this to secpack. Connect to Wifi then run Installer. Install these in the specific order:Community sourcesBSD subsystemOpen SSH Once it’s all done go back to settings -> WIFI. Tap the blue arrow beside your connection to check your IP. Open putty and plug in the IP address in the box.  A terminal will now open. Username is root and password is dottie.Now type each command line and press enter… and yes it is case sensitive so make sure to follow the capitalizations. My comments will start with *** cd /usr/binchmod +x bbupdaterchmod +x ieraserlaunchctl remove com.apple.CommCenterbbupdater –v *** checking baseband is 4.01ieraser *** this will erase the basebandbbuppdater –e *.eep –f *.flsbbupdater –v *** Checking if baseband is downgraded to 3.14launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plistexit - Run Unlock found on your main screen and wait for it to finish. Once it’s done, just insert a non ATT/Cingular SIM and make a test call. Check youtube connection as well.
199
« on: November 08, 2007, 11:42:25 AM »
SGH-J600 O2
just tick GET Info!Then Follow the Fly-Help option! Until you see the personalized Cancelled! then the Phone will Reboots.Then,DOne!Simply like that! 
200
« on: November 08, 2007, 07:46:19 AM »
Insert Correct sim with any many other sim.Including AT&T...But now,it's ok Sorry i got no details cause it's very complicated step by step... Lucky enough I have made it!If you are not capable enough to understand tricky instructions...Well Then, dont be eager to do it! SO..,, This is the iPhone the version is 1.1.1 (3A109a)
and the imei begins with Zero ex. 00499901------
Modem Firmware is 04.01.13_G So I downgraded it to v1.0.2 then unlockDownload all of this! Itunes 7.5setup http://www.sendspace.com/file/gcwpx0Downgrade baseband http://www.sendspace.com/file/s305dsiPhone,1.0.2_1C28_ Restore http://www.sendspace.com/file/8mf0mt Just Dl All I cannot upload the step by step cause lots of image to upload .,! compose of 32 images with instructions.forgive me! but i can guide you if ever you face the same problem as i have for the best that i can!Just ym me! As long as i got nothin doin anythin!
201
« on: November 05, 2007, 02:50:03 PM »
Tested working v3.9.1¬ infected by virus. After you install this it cannot be detected as virus...hehehehehe!
202
« on: November 05, 2007, 10:51:01 AM »
Boot Loader 0.6.3.1SW Version:R26_U_83.38.38.04.01P Used Version 2.12 THEN SELECT V980 (R26_U_xx_3x_xx) then Tick Directly Unlock!!!Then Follow Steps!!!follow steps!!!The UBL will upgrade its Boot loader version!!!CONTINUE just follow steps until you will see UNLOCK skip tp Sequence OK As you notice the Boot Loader was changed!it automatically upgrades the bootloader on unlocking process!  UNLOCKED DONE!!! Sorry!No logs at all! Cause you will just direct tick Unlocked then simply follow steps!!!
204
« on: November 03, 2007, 11:54:26 AM »
I got no cable with my NS.
So I got this codes!
This code is very common and very usefull!hehehehe.
First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad
*2767*3855# (wait 10-15 seconds) phone will reboot(restart)
When phone completes reboot ENTER
*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks...
network lock - inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive
auto sim lock - inactive
just follow this code till you see the Networked Personalized and Network Deactivated!!!
206
« on: November 02, 2007, 03:28:23 PM »
this is the problem!when it inserts batt! only bootloader!just tick link!http://pixpipeline.com/d/d846f97cdf9b.jpg Done Repairing,just tick link!http://pixpipeline.com/d/84345e8fe42d.jpg sorry mostly of imagehosting was under construction! Just follow the attachment! Step 1: Select desired Model And bootloader sw version!then tick Enter Blank!follow steps of the attachment 1and attachment 2 is Finished in Enter Blank! Step 2:Tick Repair!follow the steps of attachment 3 until it is ok in repairing! Step 3:Tick Leave Blank!follow the steps of attachment 4 until it is ok-see attachment 5 Done! for Reference!!!
208
« on: October 31, 2007, 08:55:52 AM »
 Using Com port cable!*Just tick FREE BULGARIAN MEDICS IN LIBYA*Connect cable to the powered off phone *Wait for the codes will appear!*Insert non-accepted sim then enter what is asked (NCK)*Done!
210
« on: October 29, 2007, 11:26:25 AM »
Special THANKS to GSMtimes!!!
 then tick unlock/Repair at se tool!
sorry no image!
at this time!
Pages: 1 ... 12 13 [14] 15 16
|
Show Posts
