This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Prolevelz
Pages: 1 ... 10 11 [12] 13 14 ... 16
166
« on: December 12, 2007, 04:46:21 PM »
Done! Via Flashing!!! Set the baud rate to 92160 the platform to Default then Check Differences only!!! After flashing... do the service!!!
Uncheck only the Repair Network Build Default NVM

Then do the costum reset & E2p reset
167
« on: December 11, 2007, 01:50:20 PM »
Power off unit! tick Get info!!! insert cable!!! then power onn! Here is the result!  then insert sim then power onn! then enter the codes of the net lock code!!! Or follow fly help!!!! here is the result!!!  unit was unlocked!!!
169
« on: December 06, 2007, 08:29:32 AM »
Original Firmware:Bootloader 0A.C0Sw VersionR452D_G_08.04.05R Flashed withR452D_G_08.01.0AR  Unit is workin fine now!
170
« on: December 03, 2007, 02:32:55 PM »
  Special thanks to my Mentor!!! Sir Raezak!!!
172
« on: December 01, 2007, 03:51:07 PM »
 Off unit!!! tick unlock then insert cable!!! wait for 5secs!!! then after unlock go to the Network selection then change the desired network in your place!!!
173
« on: November 28, 2007, 09:44:31 AM »
Auto-off!Flashed Succesfull!  After Flashing don't disconect the cable yet!!! Wait for 5secs for the Unit to reboot!!! wait for the main menu!!! then get the cable then E2p *2767*3855#
174
« on: November 27, 2007, 01:06:53 PM »
Problem: when you power onn,only SGH-X620then hangs-------- Flash only with binarySet Speed to the LowestThen Tick Repair mode!!! Then after flashing (and you have tick the repair mode so Your IMEI was OOOOOOOOOOO Zeros after flashing)Just repair the imei!!! Logs of Repair IMEI!!!Entering TAT Mode...Proceeding changing IMEI...Writing IMEI...Operation successfully completed
175
« on: November 26, 2007, 12:11:41 PM »
Very old Phone But still i can get small money!! hehehehe!  Open UBL SW Select the Model Number!!! Power Onn the Unit! Select P2k Full Messages Then Tick Read Phone Info
176
« on: November 24, 2007, 03:34:30 PM »
177
« on: November 23, 2007, 12:52:29 PM »
PROCEDURE:1. OPEN UB-BOX software2. GO TO DCT4/FLASH TAB3. SELECT MODEL: RH99 VERSION: 3.404. LOAD MCU: rh99_03.400 PPM: rh99_03.40aa NAI: rh99_nai3.40aa5. put check on UNLOCK (after flash processing option)6. remove/delete RH-99_3.40.org in C:\Uni\Files\Nokia\DCT-4\Patchnote: every time you will unlock 1200 units be sure that RH-99_3.40.org wasalready removed to that folder to avoid contact service.7. now press FLASH8. WAIT UNTIL IT FINISH (FLASHING AND UNLOCKING)note: some error will be happened at the end of process due to missing ofRH-99_3.40.org in C:\Uni\Files\Nokia\DCT-4\Patch "but don't panic..."VIOLA YOUR PHONE IS UNLOCKED/REVIVED Locked Globe:Opened! Special thanks to sir Sandman and Sir ShawGsm
178
« on: November 23, 2007, 11:07:25 AM »
An application that does it all to your iPhone?? Virginize? Jailbreak? 1.0.2? 1.1.1? 1.1.2? Ringtones? Support for unlocking? THIS IS IT!!!!! Read all here and download!!!
Pages: 1 ... 10 11 [12] 13 14 ... 16
|