Topics

16

WD2 Section / Nokia 3230 Display jeck ways

« on: February 07, 2008, 02:44:21 PM »

If u like post just press thanx

17

DCT4 Section / Nokia 3220b to 3220 convert

« on: February 05, 2008, 10:38:42 AM »

3220b to 3220

change the filters , upload good pm file , unlock it


Simple maybe useful for all

18

DCT4 Section / Nokia 6103b to 6103 succesfully convert

« on: February 04, 2008, 10:55:33 AM »

:)Nokia 6103b to 6103 convert:)

1.Unlock mobile on jaf or ufs simply
2.Replace two filters with 1100 or 3100
3.write good pm..u can write of 6101 also
4.unlock onace again & enjoy all operaters

here is pm files-- 6101 & 6103 pm files.rar

here is screen shots---




Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
Building RPL backup file...
C:\Program Files\ODEON\JAF\ProgData\359372000512574_imei_backup_163132.rpl
Done!
Backup imei OK!
Flashing Done!
Operation took 0 minutes 2 seconds...

After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RM-161, Software version: 04.62
IMEI: 359372000512574
Product Code: 0522987
Resetting PPC...
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 9 seconds...
Done!
Done!
Powering the phone...
Unlocking...
IMEI: 359372000512574
ASIC: 2
SW version: 04.62
Checking locks...

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!
DCT4 unlock counter: 235
Done!


Simple maybe useful for all

if u like post press thanx

19

Infinity-Box / China cect u8800 auto shut down after insert sim solve by infinity

« on: February 01, 2008, 11:57:07 AM »

Simple maybe useful for all----

[/url][/IMG]


COM15 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:D3A4:8779
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.BAA4E526.[MY6226_PCB01_GPRS_MT6226_S01.DM200_V09_1_7_MTR_DL_XM.BIN_709A89EE].rpl
identification#1 detection finished
device-id: BAA4E526
identification#1 protocol ver: 04
ver. sw1: MY6226_PCB01_GPRS_MT6226_S01.DM200_V09_1_7_MTR_DL_XM.BIN
ver. sw2: DM200.V09.1.7.MTR.DL.XM
ffs offset/size: 00F00000/00100000
detect device identification#2...
detection phase #1...
.


warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00F00000
flash: 89880F00010001:89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00F00000
detecting eeprom/ffs size...
eeprom/ffs size: 00100000
ffs chip: 00
eeprom/ffs area: 00000000:00F00000-00FFFFFF
reading [eeprom[MY6226_PCB01_GPRS_MT6226_S01.DM200_V09_1_7_MTR_DL_XM.BIN]]...
error: unexpected data: 15000000C715000000C715000000C715000000C715000000C715000000C715000000C715000000C715000000C715000000C715000000C7
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[MY6226_PCB01_GPRS_MT6226_S01.DM200_V09_1_7_MTR_DL_XM.BIN]_20080201-110850.B0E.bin
flash: 89880F00010001:89880F00000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 89880F00010001:89880F00000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_BAA4E526_MY6226_PCB01_GPRS_MT6226_S01.DM200_V09_1_7_MTR_DL_XM.BIN_709A89EE_20080201-110906.B0X.bin
Finished, time used: 211 sec
Remove/Install battery now !


Hre is pinout--------

20

Infinity-Box / Spice S545 unlock successfully by infinity

« on: January 25, 2008, 03:53:38 PM »

COM15 selected
Device: Spice S545
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6205:8B00]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC22A000000000:18E59F00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
.
detection phase #2...
................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
reading [eeprom]...
file saved: C:\Documents and Settings\Ravi\Desktop\backup_eeprom_20080125-132817.B0E.bin
flash: EC22A000000000:18E59F00000000
Identification Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
detecting additional parameters...
......
flash: EC22A000000000:18E59F00000000
flash: EC22A000000000:18E59F00000000
Write: area 0/1
..........
additional parameters detected Ok
Finalization Done
Write...
flash: EC22A000000000:18E59F00000000
Write: eeprom
Write Done
Finished, time used: 215 sec
Remove/Install battery now !


REVERSE RX & TX IF PINOUT DOESN'T WORKS...

21

Infinity-Box / chinese cect Q86 auto restart problem fixed by infinity

« on: January 25, 2008, 03:49:01 PM »

COM19 selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
chip: 0031:B765:9A0F
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E558_P2.01.4_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35113533101485
connection Ok
building list...
done
items to clear: 260
240 of 260 items cleared
building list...
done
1 items remains
Finished, time used: 137 sec
Remove/Install battery now !

22

Chinese Miracle / chinese cect p3660 problem?

« on: January 12, 2008, 12:43:49 PM »

Hello friends .... i hav a chinese cect p3660 & its bluetooth not working,when i open camera its shows camera module not work,select video mode & it goes to hang,microphone & charging also not working....can any friend help meeeeeeeee?

23

J.A.F - Just Another Flasher / jaf error in read pm

« on: January 10, 2008, 01:25:35 PM »

Hello friends i hav a question....when i read pm in jaf its reads & shows read full pm done but when i check pm file memory in properties there is 0kb.....what is this every option in read pm is ok...can anyone tell me..i hav latest verion 1.98.43...is this jaf's hardware fault or company fault or any other? plz help meeeeeeeeeeeeee

24

BB5 Section / BB5 Tool & keygen

« on: January 06, 2008, 02:49:33 PM »

http://uploadmb.com/dw.php?id=1199607853&/BB5 tool & keygen.rar

25

Chinese Miracle / Chinese nokia n95 pinout

« on: December 28, 2007, 11:49:48 AM »

  :011[1]:   chinese nokia n95 pinout

26

BB5 Section / Nokia camera solution

« on: December 07, 2007, 06:52:45 AM »

Nokia camera solution

27

Nokia Hardware Section / Nokia pa jumpers

« on: December 06, 2007, 07:56:11 PM »

Nokia pa jumpers

28

DCT4 Section / World unlock codes calculater

« on: December 06, 2007, 07:05:51 PM »

World unlock codes calculater

29

Motorolla / C113,115,117,118 Unlocker

« on: December 06, 2007, 11:21:41 AM »

C113,115,117,118 Unlocker

30

BB5 Section / Nokia 6300 display ic jumpers

« on: December 05, 2007, 09:17:49 AM »

:3:Nokia 6300 display ic jumpers