Messages

91

Apple IPhone software / Re: IPHONE 3g UNLOCKING

« on: January 30, 2009, 11:41:06 AM »

These are instructions on how to software unlock the iPhone 3G for use with any GSM cellphone carrier.

Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 02.28.00 baseband(modem firmware). This means that you must be running the 2.2 firmware. If you used PwnageTool to update to 2.2 from 2.1 you will have to rejailbreak using a QuickPwn jailbreak tutorial for the time being.

To find your firmware and modem firmware(baseband) versions you can follow this tutorial. If you are not on firmware version 2.2 and baseband version 02.28.00 then you need to follow one of these tutorials before unlocking: Mac, Windows

Step One
Press to launch Cydia Installer from your SpringBoard.


Step Two
Press to select the Manage tab at the bottom of the screen.


Step Three
Press to select the large Sources button


Step Four
Press the Edit button at the top right of the screen.

92

Apple IPhone software / IPHONE 3g UNLOCKING

« on: January 30, 2009, 11:38:56 AM »

IPHONE 3G UNLOCKING
 
 

 
ULOCKING APPLICATIONS SOURCES
 
 
Cydia source: http://apt9.yellowsn0w.com/
Installer repo: http://i.yellowsn0w.com/
 
How to Unlock the iPhone 3G GUIDE
 
How to Jailbreak Your 2.x.x 3G iPhone Using QuickPwn (Windows)
 
IPHONE FIRMWARE 2.2.0 (3G
 
if not working for u try this
 
1.) Turn off your phone
2.) Turn on your phone
3.) Get off the SIM tray
4.) Wait a lil bit, and get it in
5.) Wait 1-2 minutes, if it don't work turn ON the AirPlane Mode, wait 30 seconds, turn the AirPlane Mode OFF. Wait a lil bit.
 
TESTED AND WORKING TRY AND ENJOY WITH YOUR IPHONE 3G
AND THANXZ TO DEV TEAM
 
UPDATES
Soon you’ll see yellowsn0w 0.9.1 in the repos. It uses a much longer delay to let your SIM card initialize. If you have problems with 0.9.0, try this one and wait a full minute after you seem homescreen, then reinsert sim card. We need both success and failure reports to tune this across the world, so please be patient (but please also report result!)
If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line -q right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)[/[/SIZE]
 
more info [/COLOR]here

93

NSPRO / NsPro v5.0.8 released:

« on: January 28, 2009, 01:47:43 PM »

Added D980 full support:
-Direct Unlock
-Master/Slave IMEI Write
-Flashing master/slave BIN & TFS
-Read/Write eeprom/full flash
-Service Jobs resets

Added F275, F480L, U900L, S3600 full support:
-Direct Unlock
-Write IMEI
-Flashing BIN & TFS
-Read/Write eeprom/full flash
-Service Jobs resets

Added B270, C275, S3030 full support:
-Read Info (lock codes)
-Direct Unlock
-Write IMEI
-Flashing
-Service Jobs resets

Added E1110, E1117, M140 full support:
-Direct Unlock
-Write IMEI
-Flashing
-Service Jobs resets

Added i907 support:
-Direct Unlock

Added flashing support for new B130 hardware revisions.
Fixed J770 TFS flashing problem.
Improved new Agere (B520, M310) unlocking protocol.

New NsPro version is available on NsPro support area,

On NsPro official website: http://www.nsteam.org/download.html

and on rapidshare: http://rapidshare.com/files/190441713/NsPro_v5.0.8.exe

94

New Member's Lounge / Re: new member hope im welcome here..

« on: January 22, 2009, 02:00:28 PM »

here sir......

95

New Member's Lounge / newbie here.....

« on: January 22, 2009, 01:55:53 PM »

hi!! any member i hope welcome this forum...

thank you all.........