Messages

1

MXKEY Nokia Flasher and Unlocker (by Alim Hape) / MXKEY / MXBOX v3.5 revision 1.7 Download Link Here

« on: January 08, 2012, 06:01:45 AM »

MXKEY / MXBOX v3.5 revision 1.7
Public Discussion Thread



ORIGINAL XTC CLIP PLUS
with 6 FLEX CABLES






MXKEY / MXBOX v3.5 revision 1.7




Nokia Tool

added:
- SL3 RSA Signature verify on "Read Hash", sha readed by MX now is 100% valid
- Disk usage info on fire.exe

improvements:
- file version indentification for installed data package
- phone images definitions in now synched with fire tool
- pinout images updated

bugfix:
- rapido usb bootstrap causing BSOD
- xgold not booting
- [sl3bf], oclHashcat 00.08 speed not shown

hti drivers updated


updated sl3u to version 1.7
- added: Master sp code verification on calculate cod
- improved: online logger function


updated sl3bf to version 3.6
- added: Master sp code verification after bf task finished
- bugfix: oclHashcat-lite-0.08 with "--outfile-format=1" problem



MXKEY / MXBOX v3.5 revision 1.7 Download Link Here

2

AVATOR BOX / AvatorBox Ver5.813 Free Download

« on: December 30, 2011, 12:31:25 PM »

Happy New year To all Avatorbox Users

AVATOR BOX (China Phones Service Tool) VER 5.813
29 DECEMBER 2011



What is new:

******** Ver5.813 (2011-12-29) **************
New features:
1.Support new flash memories: SF_GD27Q64, NAND_H8ACSOEJOMCP_66M
2. Pinout Perfomance Improved
3. MTK 6252 Tracker Improved
4. SPD Unlock Timeout Fixed
5. change richedit background to white




Download Avatorbox_5.813.exe.

3

MXKEY Nokia Flasher and Unlocker (by Alim Hape) / MXKEY/MXBOX v3.5 revision 1.6 Download

« on: December 13, 2011, 11:05:34 PM »

MXKEY/MXBOX v3.5 revision 1.6, Public-Release
MEGA UPDATE - OLD VERSIONS ARE OBSOLETE


What is new added, changes and improvements:

MAIN

Introduced HTI Firmware version 00.49
New in firmware 00.49:
- added: boot mode switch function
- improved: serial and flash bus communication routine
- added: dct4 product data calc algorithm
- added: broadcom sec.repair algorithm
please Update HTI by using "Update HTI" button !

- uistyle updated
- HTI identity now displayed on Dongle Maintenance
- HTI serial displayed on connection tab
- added: support for HTI PLUS (MXBOX ORANGE) interface



Nokia Tool

- bugfixed: NCK send for PA_SIMLOC30 (error 0x1)
- added: HTI Standalone function for DCT4 PRODUCT/BT/WLAN DATA fix.
(required HTI FW version 00.49 or later)
- added: BB5 security repair function by USB for RAP3Gv4, RAPUv2, BROADCOM(BCM21351)
- added: BB5 security repair function by HTI for RAPUv2
- improved: BB5 security repair function on all supported ASIC

Note for BB5 security repair function:
Works standalone with HTI connected
Required HTI FW version 00.49 or later
This function includes:
- FULL RPL BACKUP
- SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
- SIMLOCK REPAIR (PA_SL/PA_SL2)
- NCK CALC (PA_SL/PA_SL2)
- SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
- SL3 NCK CALC (PA_SL3/PA_SIMLOC30, 15 digit NCK)

Phones supported by HTI:
- Any RAPUv1, RAPUv2, RAP3Gv3, RAP3Gv4 and RAPIDO phones.

Phones supported by USB:
- Any RAPUv1, RAPUv2, RAP3Gv4, RAPIDO and BROADCOM(BCM21351) phones.

Supported ROOT KEY HASH:
ALL HASH supported !


sl3bf(Local SL3 Bruteforce) module changes
- added: support for oclHashcat-lite-0.08

sl3u(SL3 Logger) module changes
- added: Online Logger page
- and more minor bug fixed


SL3 UNLOCK
SL3 Logger/Unlocker (sl3u.exe)
- added: support for RAP3Gv4, RAPUv2 by USB
- added: Online Logger tab
used to request unlock codes by imei+hash (.sha files)

How to unlock SL3 with HTI:
1. Register HTI to use this service
(choose your password here !)

2. Top up HTI credit to be able to use this service

3. Login using password chosen when registration

4. Upload Hash, select sha or log files

5. Wait for few minutes (As displayed on waiting time)

6. Job Status are displayed once you Upload Hash and everytime you Login
use Login button, to check or request codes for uploaded hash(if any)

7. When status is "finished", right click on individual hash and select one of menus


- Abort/Cancel Job: will cancel job and refund credit
(only available when job is "pending")
- Send Codes to the phone: Send codes directly to the phone
- Save Codes to text: Save codes to text file
- Copy Codes to clipboard: Copy codes to clipboard


NOTE for SL3 Unlock:
SL3 Unlock is in beta stage
Beta test resellers will be chosen.
This resellers can chose their beta test users.
To be a beta test user please contact your reseller.



Link to download MxBox/MxKey v3.5 rev1.6 for FREE
Click Here

4

AVATOR BOX / HOT UPDATE | Avatorbox 5.700.exe | Mstar Direct Imei Repair Added All CPU'S

« on: October 23, 2011, 09:42:31 PM »

AVATOR BOX (China Phones Service Tool) VER 5.700
21 October 2011



What is new:


******************** Ver5.700 (2011-10-21 *********************
New features:
1 [MSTAR] DIRECT IMEI REPAIR (including Micromax X550 Supported)
[MSTAR]All MSTAR CPU SUPPORTED TILL NOW
2 [SPD] Support SC6610/20 serial flash
3 [All Chips] Support new serial flash memory:
SF_W25Q16CV
SF_N25Q032
SF_N25Q064

Bug fixes:
1.[SPD] Fix SC6600D ReadFlash
2¡ê? some tiny bug fixed


Click here to Download

5

MX-KEY (by Alim Hape) / MXBOX SL3instant unlock activations accepted in new Firmware - v3.5 revision 1.4

« on: October 09, 2011, 09:43:10 AM »

MXKEY/MXBOX v3.5 revision 1.4, Public-Release
MEGA UPDATE


What is new added, changes and improvements:



MAIN
1. introduced HTI Firmware version 00.24

new in firmware:
- firmware accept SL3instant unlock activations for MXBOX
- bugfixed: BB5 security repair algorithm for RAPIDO new ASIC
- implemented WD2 and BTMCM flashing protocol
- implemented TIKU and MM(NAND) flashing protocol
please Update HTI by using "Update HTI" button or "HTIUpdate.exe"

2. improved: antivirus compatibility.

3. improved: daily update check routine.

4. improved: built-in downloader routine
- added: resume support
- bugfixed: handing big file size(more than 1G)

5. added: support for upcomming windows 8(windows developer preview) support.

6. added: Detailed 'LastError' message window when No Security Dongle Detected

7. added: Detailed HTI identity(boot & fw version, serial) on connect.



New Application released:

MXKEY - Fire Agent(fire.exe)
it's brand new support tool and firmwares download support client

1. Using shared configuration with corresponding module,
simplify the needs to download/update firmware file.

2. Working in sync mode with modules for better usage.

3. using built-in downloader with resume support.


Supported services:

1. Nokia firmware, along with latest firmware notification info

2. CDMA firmware, various vendor(Alcatel, Haier, Huawei, LG, Nokia, ZTE)

3. more services to be added at the future



Nokia Tool

- important informations (Asic ID, ROOT KEY HASH, UEM Imei) now highlighted (beginner friendly).

- added: BB5 security repair function for RAPUv2 phones (beta testing)

- added: Verify Secure Data at 'Read SL3 Hash'/'Read Phone IDs',
(used to verify if secure data readed from the phone is valid to make sure
the hash readed by software(both USB/FBUS) is 100% correct)

- added: "Fire Support" menu in module`s options.

- added: support to load variant definitions created by fire.exe

- added: Spesified window dialog when card is busy/used by other module to fire.exe, sl3u.exe.

- added: support to convert log to other third party format to SL3BF module (sl3u.exe)

- added: new definition to 'phoneIdentity.ini.default'

- added: flash loader version 11.24.000.3 to setup

- added: RPL backup list load at scan (used for "Write Rpl' with 'Use RPL file' ticked)

- added: PM backup list load at scan

- improved: module initialization.

- improved: 'phone definitions loading' at first load.

- improved: 'HTI Auto BSI(SoftTMA)' set.

- improved: file/image version check routine.

- improved: Reboot after flash mode

- improved: WD2 flashing with HTI

- bugfixed: BTMCM flashing bug with HTI

- bugfixed: No Security Dongle Detected when HTI connected with phone
(HTI power switched off on load)

- bugfixed: RAPIDO New Asic security repair function


CDMA Tool

- added: "Fire Support" menu in module`s options.

Download Here

6

AVATOR BOX / Avatorbox Ver5.620 Beta Version For MTK 6252 Test !!

« on: September 19, 2011, 08:39:43 AM »

Click Here TO Download

7

Motorolla Hardware Section / Motorola Lead-Free Repair Procedures

« on: September 02, 2011, 12:03:26 PM »

all member here..enjoy to learn more motorola hardware repair procedures!that is good solution.

Underfill Rework Process
Open/peel off the shield cover, put the board on the repair fixture, use hot gun to heat the BGA, remove BGA when the solder melted.
Apply flux to the pads of the board, and clean the BGA area with electric iron!

Repair_Soldering_Procedures

Click Here to Download

8

AVATOR BOX / Important | Avatorbox Users Who Facing Problem Read Info Only

« on: September 01, 2011, 10:34:01 AM »

Hi Avatorbox users.

I read many posts in Avatorbox Section . user Facing Read info only . To Fix this issue .download file . below link


Please Download this file and replace in your Avatorbox Software Folder

Download Agent lib

tested by me

Initializing...
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: MAUI.09B.W10.12.MP.V27.F1

9

AVATOR BOX / AvatorBox News : AVATOR BOX VER 5.610 - 27 August 2011 Update

« on: August 27, 2011, 10:35:13 PM »

AVATOR BOX (China Phones Service Tool) VER 5.610
27 August 2011



What is new:


***************************** Ver5.601 (2011-8-18) ****************************
New features:
1£º [MTK] MT6236 supported
2£º [MTK] netword unlock improved
3£º [MStar] MSW8533C Nand supported
4£º [All Chips] Support new flash memory:
NOR_K5N6433ATB
NOR_MX29GL640E_H_L
NOR_MX29NS640E
NOR_S29VS064R_T
NOR_M58WR032KU
NAND_HY27UF084G2B
5£º[MISC] Flasher Log Added
6£º[MISC] Flasher info can copy to the clipboard directly with the right click


Click Here To Download

<< New Revolution Fast pinout Detection tool For all Chinese Phones >>



Best Regards,
AvatorBox - New Revolution Fast pinout Detection tool For all Chinese Phones Service Tool - AvatorBox
(China Phones Service Tool)

[/COLOR]

10

MXKEY Nokia Flasher and Unlocker (by Alim Hape) / MXKEY v3.5 revision 1.3 - MEGA UPDATE - The only NOKIA BOX with TMA included

« on: August 07, 2011, 10:17:26 PM »

MXKEY v3.5 revision 1.3 - MEGA UPDATE - The only NOKIA BOX with TMA included

NEW ADDED

- added: model selection by type designator or phone description

- added, fw version check between connected phone, mcu image, server during 'Scan Phone'

- added, fw version check between selected mcu image and server during 'market select'

- added, "Copy All Links" on Nokia Download Window

- added, auto complete on Model selection

- added: more detailed description of errors if an error occurs

- added: "[BB5]Use New Protocol for RAP3Gv3" option to config->Directory

- added: phone`s image load from server(if any).

- added: latest firmware version check(if any) for BB5 phone on market select.

- added update dialog window when HTI firmware outdated.


BUG FIXED:

- bugfixed: Nomadik dead usb flashing (Bootstrap failed)

- bugfixed: RAP3Gv3 dead usb flashing (stop at sending bootloader)

- bugfixed: usb3 connection status query

- bugfixed: XGOLD 213 "Use Embedded SBL from MCU" does not work if BB5 selected in generation dropdown.

- bugfixed: access violation on synchronize files when Download window opened.

- bugfixed: application crash on load in some os(win7 x86 no sp).

- bugfixed: XGOLD213 usb flashing error when no mcu spesified

- bugfixed: SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: X1-01 XGOLD flashing bug.

- bugfixed: No progressbar on flashing.

- bugfixed: New RAPIDO SL3 read PhoneIDs shows 'Operations not supported'

- bugfixed: processing file with size more than 900MB.

- bugfixed: emulate phone on New Protocol causing application to be hang.

- bugfixed: random crash on buscheck with usb connection

- bugfixed: dead after flashing in NOR flash devices (affected on x64 pc with memory more than 4GB)



OTHER CHANGES IN IMPROVEMENTS

- Renamed 'Image DL' caption to 'Download' as this will be easier to understand

- 'Download' will show input dialog if no product code spesified

- local rfbb will also handle rfbb file format

- local dcc will also handle pm file format

- changed FlashLoader selection from dropdown to checklist as this will be more user friendly.

- changed SoftTMA to slider as this will be more user friendly.

- Some UI changes
Add fading on loading module using balloon hint instean of ordinary hint

- changed manifest of mobileEx.exe, SL3 Bruteforce (sl3bf.exe) from 'asInvoker' to 'requireAdministrator'.
Library and modules will need to update their xml configuration files regularly,
or create if xml configuration is not exists. This operation required admin level on vista and win7 core.

- to not confuse users, Nokia USB ROM is now displayed only when no physical NMWCD* device connected
for dead usb flashing, Nokia USB ROM should be used instead of 'Phonet' device
* NMWCD: Nokia Mobile Wireless Communication Devices

- improved auto enable RAPIDO "FUR Cold Boot" by usb hub information

- improved synchronize files routine, auto retry when download failed.

- improved GetFlashAddress and Custom Erase function
(not pooling phone after operation)

- improved *.default(config update) file handling

- removed experimental "run in main thread" bug caused app hang

- usb flashing routine improved

- usb connection handling improved

Click here to download

[/SIZE][/URL]

11

AVATOR BOX / Avator New Version 5.510

« on: August 03, 2011, 07:08:57 AM »

Avator New Version 5.510

Click Here To Download

If u have any doubt in install R about Avator Please buzz me In [email protected]

More Updates Coming on the wayyyyyyyyyyy.........

12

AVATOR BOX / Avator New Version 5.510

« on: August 03, 2011, 07:07:03 AM »

Avator New Version 5.510

Click Here To Download

If u have any doubt in install R about Avator Please buzz me In [email protected]

13

HWK / Video Tutorial For HWK New users

« on: August 03, 2011, 07:03:24 AM »

Video Tutorial For HWK New users :

Here is the video tutorial For new Hwk Users :

Click Here To Download

14

MXKEY Nokia Flasher and Unlocker (by Alim Hape) / Mx Key Video Tutorial For NEW USERS

« on: August 03, 2011, 07:01:47 AM »

Mx Key Video Tutorial For NEW USERS :

Here is the video tutorial for mx key new users

 click here