This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - amityville
Pages: [1]
1
« on: November 25, 2007, 10:06:46 AM »
2
« on: November 21, 2007, 03:41:31 PM »
for reference only:D K810i locked to globe telecom successfully unlocked via flash patching with setools latest update no logs needed but u need to check use server... if you know the firmware version of the unit you don't need to full flash it just flash it with the main firmware that matches the current firmware of the unit:D you can simply figured out the current firmware of the unit by pressing identify button:D   here's the logs [COLOR=Red][B]v0.914014/UNI
Card serial:amityville
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701741775 CERT:RED
FLASH CID:52 COLOR:RED
Model:K810i
[COLOR=Magenta]MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM[/COLOR]
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102779/84
CDA version: R1A
Default article: cxc1250813
Default version: R1KG001
Network LOCKED
Operator: 515-02
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
SECURITY UNITS BACKUP CREATED.
Elapsed:5 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701741775 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701741775 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
HOLD "C" BUTTON AND ATTACH AGAIN
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
DB2020_PRELOADER_FOR_SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\deekei\Desktop\R1KG001_1250904_CHINA_SM.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
full sig complete.
USERCODE RESET TO "0000"
Searching...
Firmware lock check determined.
Elapsed:894 secs.
[/B][/COLOR]
3
« on: November 13, 2007, 08:38:10 AM »
K810i CID52 UNLOCK SUCCESS! the unlock process cost me 10 logs bec. it's a cid52 unit locked to globe telecom... and it took 14hrs to complete the process...(it's already closing time when i receive the unit, so i started unlocking it and wait for d calculated code the other day:D)  here's the log: [COLOR=Red][B]v0.914007/UNI
Card serial:amityville
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701742224 CERT:RED
FLASH CID:52 COLOR:RED
Model:K810i
MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102779/84
CDA version: R1A
Default article: cxc1250813
Default version: R1KG001
Network LOCKED
Operator: 515-02
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
SECURITY UNITS BACKUP CREATED.
Elapsed:5 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612701742224 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Backup security data...
Erasing locks...
DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS
SEARCHING FOR PHONE, "STOP" TO ABORT
Can't read IMEI (COM3)
Can't read IMEI (COM3)
PHONE FOUND AT COM30
phone ready to proceed.
Connecting to server
seed is:amityville
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:206 secs.
[/B][/COLOR]THANKZ TO POGZ ( randie_) for his greatful ideas in unlocking it:D
4
« on: November 11, 2007, 10:11:15 AM »
6030b rm-225 successfully converted!!! [/COLOR] action taken: 1.) reflash the phone with rm-225 v5.25 firmware 2.) writing good pm file from 6030 rh-74 3.) unlocking it 4.) modifying the hardware as shown in the picture...  here's the log... [COLOR=Red][B]Getting MCU ID
MCU ID: 0x2031
FLASH ID0: 00898809 -> INTEL Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.00
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.24
16-08-06
RM-225
(c) Nokia.
HW version: 0804
PCI version:
UEM version: 1328
UPP version: 8241
RFIC version: 0500
DSP version: P05w19.v25
LCD version: ELBE
PPM version: V 5.24
16-08-06
RM225
(c) Nokia.
mtm
Production serial number: QC7014854
Product code: 0539055
Module code: 0203158
Basic production code: 0538885
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 011052004104780
IMEI spare to net: 0A 11 50 02 40 01 74 08
IMEI SV to net: 03 11 50 02 40 01 74 18 F5
Master Code: 6015252470
Phone type: RM-225, Software version: 5.24, Language Pack: mtm
User code: 12345
Block 1:
Lock 1: CLOSED -> Lock Data: 20416F
Block 2:
Lock 1: CLOSED -> Lock Data: 21630F
Block 3:
Lock 1: CLOSED -> Lock Data: 21901F
Block 4:
Lock 1: CLOSED -> Lock Data: 23001F
Block 5:
Lock 1: CLOSED -> Lock Data: 23102F
Block 6:
Lock 1: CLOSED -> Lock Data: 23203F
Block 7:
Lock 1: CLOSED -> Lock Data: 23430F
Block 8:
Lock 1: CLOSED -> Lock Data: 25001F
Block 9:
Lock 1: CLOSED -> Lock Data: 25502F
Block 10:
Lock 1: CLOSED -> Lock Data: 26002F
Block 11:
Lock 1: CLOSED -> Lock Data: 26201F
Block 12:
Lock 1: CLOSED -> Lock Data: 310160
Block 13:
Lock 1: CLOSED -> Lock Data: 310200
Block 14:
Lock 1: CLOSED -> Lock Data: 310210
Block 15:
Lock 1: CLOSED -> Lock Data: 310220
Block 16:
Lock 1: CLOSED -> Lock Data: 310230
Block 17:
Lock 1: CLOSED -> Lock Data: 310240
Block 18:
Lock 1: CLOSED -> Lock Data: 310250
Block 19:
Lock 1: CLOSED -> Lock Data: 310260
Block 20:
Lock 1: CLOSED -> Lock Data: 310270
Block 21:
Lock 1: CLOSED -> Lock Data: 310280
Block 22:
Lock 1: CLOSED -> Lock Data: 310300
Block 23:
Lock 1: CLOSED -> Lock Data: 310310
Block 24:
Lock 1: CLOSED -> Lock Data: 310580
Block 25:
Lock 1: CLOSED -> Lock Data: 310660
Block 26:
Lock 1: CLOSED -> Lock Data: 310800
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-225.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0539055
INI file 0539055.ini is missing. Continue searching for second ini type...
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: rm225__?
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.250
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.25mcr
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.25.image_m_cingular_01
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
Building RPL backup file...
C:\Program Files\ODEON\JAF\ProgData\011052004104780_imei_backup_12111111.rpl
Done!
Backup imei OK!
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.250
Booting phone...
MCU ID: 0x2031
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.40.00 -> Revision: 0007
Boot size is 0x0970
Boot is ready...
FLASH ID0: 00898809 -> INTEL Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x09888900
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_intel.fia
Loader version: 04.40.00 -> Revision: 0007
Loader size is 0x5478; Loader chk: 90
Loader is ready...
P-key nokia module version 01.00
MSID: 849A1C58CB71657709B311906A
MSID decoded: 9EC3BAE900531485A9000000
FAID: 92456B93F707023C8EDE63BE
Operation took 0 minutes 14 seconds...
Erasing...
Found 3 interval(s) to erase
Erasing area: 01000000 - 0101FFFF...
Erasing area: 01020000 - 017FFFFF...
Erasing area: 01E60000 - 01FDFFFF...
Operation took 1 minutes 29 seconds...
Writing...
Perm. Data Restore OK
Operation took 6 minutes 5 seconds...
Restarting MCU...
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.25.image_m_cingular_01
Booting phone...
MCU ID: 0x2031
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.40.00 -> Revision: 0007
Boot size is 0x0970
Boot is ready...
FLASH ID0: 00898809 -> INTEL Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x09888900
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_intel.fia
Loader version: 04.40.00 -> Revision: 0007
Loader size is 0x5478; Loader chk: 90
Loader is ready...
P-key nokia module version 01.00
MSID: 84EF675EEEB11EA3E84095B43E
MSID decoded: 1C15BAE300531485AD0005BD
FAID: 28EFBA6AACED13885F1337C9
Operation took 0 minutes 14 seconds...
Erasing Content Pack...
Found 1 interval(s) to erase
Erasing area: 01A00000 - 01E5FFFF...
Operation took 0 minutes 41 seconds...
Writing...
Writing converted flash to 128k page
Perm. Data Restore OK
Operation took 0 minutes 51 seconds...
Restarting MCU...
Operation took 0 minutes 0 seconds...
Extracting Content Pack...
Running: (c) Nokia File Server
CNT Extract Skiped.
Operation took 0 minutes 1 seconds...
PPM: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.25mcr
Booting phone...
MCU ID: 0x2031
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.40.00 -> Revision: 0007
Boot size is 0x0970
Boot is ready...
FLASH ID0: 00898809 -> INTEL Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x09888900
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_intel.fia
Loader version: 04.40.00 -> Revision: 0007
Loader size is 0x5478; Loader chk: 70
Loader is ready...
P-key nokia module version 01.00
MSID: 84634D0BFDFE3BFEB8BF146276
MSID decoded: 3E4EBAE900531485A8000000
FAID: 88C652096E306ABAB4C1C3A3
Operation took 0 minutes 14 seconds...
Erasing PPM...
Found 1 interval(s) to erase
Erasing area: 01800000 - 019FFFFF...
Operation took 0 minutes 19 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 58 seconds...
Restarting MCU...
Flashing Done!
Operation took 11 minutes 22 seconds...
After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RM-225, Software version: 5.25
IMEI: 011052004104780
Product Code: 0539055
Resetting PPC...
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
Done!
Setting local mode...
Reading imei...
IMEI/ESN: 011052004104780
Reseting warranty data...
Reseting LifeTimer...
Done!!!
Done!
Powering the phone...
Unlocking...
IMEI: 011052004104780
ASIC: 2
SW version: 5.25
Selected flash file: C:\Program Files\Nokia\Phoenix\Products\RM-225\rm225__5.250
Decrypting flash...
Encrypting....
Unlock found!
MCU ID: 0x2031
Algo is ready...
P-key nokia module version 01.00
Erasing area: 010A0000 - 010BFFFF...
Unlocking...
Checking locks...
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
MCU ID: 0x2031
Algo is ready...
P-key nokia module version 01.00
Erasing area: 010A0000 - 010BFFFF...
Done!
DCT4 unlock counter: 166
Powering the phone...
Writing PM...
Field: 1, Record: 0, Len: 120
Field: 1, Record: 2, Len: 90
Field: 1, Record: 4, Len: 110
Field: 1, Record: 5, Len: 2
Field: 1, Record: 6, Len: 90
Field: 1, Record: 11, Len: 2
Field: 1, Record: 12, Len: 2
Field: 2, Record: 0, Len: 356
Field: 4, Record: 2, Len: 1
Field: 4, Record: 3, Len: 10
Field: 4, Record: 4, Len: 8
Field: 4, Record: 5, Len: 8
Field: 4, Record: 6, Len: 8
Field: 4, Record: 9, Len: 5
Field: 4, Record: 16, Len: 4
Field: 7, Record: 0, Len: 4
Field: 7, Record: 1, Len: 32
Field: 7, Record: 2, Len: 4
Field: 120, Record: 0, Len: 8
Field: 120, Record: 1, Len: 8
Field: 120, Record: 2, Len: 8
Field: 120, Record: 3, Len: 2
Field: 120, Record: 4, Len: 928
Field: 120, Record: 5, Len: 1
Field: 120, Record: 6, Len: 8
Field: 120, Record: 7, Len: 8
Field: 238, Record: 1, Len: 1
Field: 117, Record: 0, Len: 4
Field: 117, Record: 1, Len: 3
Field: 117, Record: 2, Len: 6
Field: 117, Record: 3, Len: 1
Field: 117, Record: 5, Len: 10
Field: 117, Record: 6, Len: 8
Field: 117, Record: 13, Len: 3
Field: 117, Record: 14, Len: 3
Field: 117, Record: 15, Len: 1
Field: 110, Record: 0, Len: 6
Done!
[/B][/COLOR]
5
« on: November 09, 2007, 12:35:01 PM »
MOTO V3X and V3i Bootloader Only Reflash Successfully!!! for reference only:D here's the log of moto V3i revived thru flashing via testpoint... [COLOR=Red]SmartMoto 2.42
S-Card: amityville Smart-Clip dongle, v 1.50, assigned Smart-Clip: amityville Europe, initializing... OK
Clip serial: amityville, version: 3.25, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... ST - M58LR128FT, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W510,Z3
Hardware IMEI: 359414001152677
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE2 359414001152677.mbk"
"S Blank Neptune LTE2 359414001152677.mbk" saved, 31.21 Mb
Writing flash section 2 of 2... 100% (64.5 Kb/sec)
Turning phone off... OK
Flash completed![/COLOR]
here's the log of V3X revived via repair pds and full flashing... [COLOR=Red]SmartMoto 2.42
S-Card: amityville Smart-Clip dongle, v 1.50, assigned Smart-Clip: amityville Europe, initializing... OK
Clip serial: amityville, version: 3.25, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... AMD - S71WS512NE0 (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: 352513010214225
IMEI OTP status: locked
Security area saved to "PDS for S Blank Rainbow POG 352513010214225.mbk"
Login request... OK
Writing flash section 2 of 2... 100% (118 Kb/sec)
Restarting phone... OK
Searching for phone... no phone found
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
IMEI OTP status: locked
Repair PDS request... OK
Performing PDS repair... OK
Writing flash section 1 of 1... 100% (32.8 Kb/sec)
Please write a corresponding Full_flash file to phone to complete repair
Writing flash section 2 of 2... 100% (128 Kb/sec)
Turning phone off... OK
Flash completed!
[/COLOR]
6
« on: November 02, 2007, 03:01:08 PM »
Z525a unlocked by SETOOL for ref only...  here's the log: [COLOR=Red]v0.91380096/UNI
Card serial:amityville
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35184101325746 CERT:RED
FLASH CID:36 COLOR:RED
MAPP CXC article: R3K028 prgCXC1123178_NAM_2_KA
MAPP CXC version: R3K028
Language Package:CINGULAR
CDA article: CDA102510/4
CDA version: 042706
Default article: cxc1123179
Default version: R3K028
Network LOCKED
Operator: MULTIPLE
USERCODE:0000
Elapsed:5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35184101325746 CERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:921600
OTP LOCKED:1 CID:36 PAF:1 IMEI:35184101325746 CERT:BROWN
LDR:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:890D
Flash props sent ok
Setting up GDFS...
Clearing total time...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "05308268"
Signing...
control keys complete.
full sig complete.
Unlock Done
Elapsed:41 secs.
[/COLOR]
7
« on: November 02, 2007, 01:51:44 PM »
N70 ME Unlocked DONE by J.A.F For reference only... here's the logs: [COLOR=Red]JAF version 1.98.38
Detected PKEY: amityville
Card life counter: 58.84%
P-key nokia module version 01.00
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Changing mode...Done!
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: C91F8EB09CCCAD04FA9556F63E2FF31B68426638
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 0C40010B43B75D511C94B2FA1DDF2B839B74B5AF
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
Error loading cmt boot...
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: C91F8EB09CCCAD04FA9556F63E2FF31B68426638
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946
CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 0C40010B43B75D511C94B2FA1DDF2B839B74B5AF
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 225000EC -> ST
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.16.00 -> Revision: 0000
Getting CMT Public Keys...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.23.00 -> Revision: 0000
Patching APE boot step2...
APE Boot Ready
APE Flash ID: 00360098 -> Unknown flash chip
APE Flash Data: 00020000000600000000000000000000
Done!
Restarting phone...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 05wk07v47
30-01-07
RM-84
(c) Nokia.
HW version: 7005
PCI version:
RFIC version: 150a160f
DSP version: rolf_05wk07v29p1
Retu version: 32
Tahvo version: 53
Production serial number: CEI837725
Product code: 0515082
Module code:
Basic production code: 0536420
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 358080011646734
IMEI spare to net: 3A 85 80 00 11 46 76 03
IMEI SV to net: 33 85 80 00 11 46 76 13 F0
LOCK STATUS:
CONFIG KEY: 5150300000000000
Provider: Smart Communications;Philippines
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 51503F
Block 2:
Lock 1: CLOSED -> Lock Data: 51503F
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-84.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0515082
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\358080011646734_CRT_backup_232211.pm
Done!
Backup LCK OK!
Setting local mode...
Reading simlock data...
LOCK STATUS:
CONFIG KEY: 5150300000000000
Provider: Smart Communications;Philippines
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 51503F
Block 2:
Lock 1: CLOSED -> Lock Data: 51503F
Reading imei...
Reading codes data...
Found codes data...
Resetting phone...
Waiting for phone...
Reading soft info...
Reading simlock data...
Writing codes data...
Unlock Codes:
#pw+247229537799391+7#
#pw+936428514882700+6#
#pw+384026822820443+5#
#pw+298768312078818+4#
#pw+545032444006451+3#
#pw+459234109684564+2#
#pw+745020351550789+1#
Uploading code to phone...
Reseting phone...
Waiting for phone...
Reading soft info...
Unlocking...
Reseting phone....
Waiting for phone...
Reading soft info...
Reading simlock data...
LOCK STATUS:
CONFIG KEY: 5150300000000000
Provider: Smart Communications;Philippines
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: OPEN
Block 2:
Lock 1: OPEN
Done!
[/COLOR]
8
« on: November 01, 2007, 11:35:08 AM »
hello guyz it's nice be in here...
hope i'm welcome here...
Pages: [1]
|
Show Posts