Octoplus Box JTAG Software v.1.8.9 Release Notes:
Added support for the following models:
LG P930 - added Dead Boot Repair via USB
LG LU6200 - added Dead Boot Repair via USB
HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG
Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair LG P930 and LG LU6200 via USB, please follow the next three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Download Octoplus Box JTAG Software v.1.8.9
