Octoplus Box JTAG Software v.1.8.0 Release Notes: - Added support for the following models:
- LG D618 - added Dead Boot/Device Repair via USB
- LG F240K - added Dead Boot Repair via USB
- LG F240L - added Dead Boot Repair via USB
- LG F240S - added Dead Boot Repair via USB
- Samsung GT-S5302 - added Dead Boot/Device Repair
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair LG D618, F240K / L / S via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Download Octoplus Box JTAG Software v.1.8.0
