Octoplus Box JTAG Software v.1.7.6 Release Notes

[kanniappan]

Octoplus JTAG Software v.1.7.6 is out!

We have added boot repair via USB and small TP for LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Octoplus Box JTAG Software v.1.7.6 Release Notes

Added support for the following models:
- LG D170 - added Dead Boot/Device Repair via USB
- LG D175F - added Dead Boot Repair via USB
- LG D180F - added Dead Boot Repair via USB
- LG D400H - added Dead Boot Repair via USB
- LG D400HN - added Dead Boot Repair via USB
- LG D405 - added Dead Boot Repair via USB
- LG D405H - added Dead Boot Repair via USB
- LG D405N - added Dead Boot Repair via USB
- LG D405TR - added Dead Boot Repair via USB
- LG D415 - added Dead Boot Repair via USB
- LG D724 - added Dead Boot/Device Repair via USB
All pinouts and Repair procedures are described in the manual ("Help" button in Software).


To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect  your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB  QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver  yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.7.6