[I]HELLO ALL
MY 6600 COMES TO ME WITH WHITE SCREEN,
I TRY TO ERASE IT USING GRIFFIN , IT GOES VERY FAST , THIS IS WHAT GRIFFIN WRITES
Initializing Phone...
Flash configuration:
9B04002000BE8800000000022000BE88...
Boot and Flash loaders operation took 8.078000 seconds
Erasing - erase took 1.766000 seconds
Flashing PPM - flashing took 0.000000 seconds
Flashing DONE
Phone reset failed (will use powerOff/On)!
PLS NOTE THAT I HAVE THE LATEST FIA FILES
THE PHONE BECOMES DEAD
THE ERASE PROCCESS TOOK ONLY 1.7 SEC
TRY TO FLASH IT WITH GRIFFIN BUT NO SUCCESS THIS IS WHAT GRIFFIN SAY:
Initializing Phone...
Flash configuration:
9B04002000BE8800000000022000BE88...
Boot and Flash loaders operation took 13.953001 seconds
Erasing - erase took 1.219000 seconds
Flashing MCUFlashing FAILED
Make sure phone is connected and powered!
ErrCodes: [18:0000]
I TRY FLASH IT WITH TWISTER THIS IS THE TWISTER LOG
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,002088BE,St M28W640
Fl1: 0x02000000-0x027FFFFF,002088BE,St M28W640
Fl2: 0x04000000-0x047FFFFF,002088BE,St M28W640
Fl3: 0x06000000-0x067FFFFF,002088BE,St M28W640
Algorithm: w2_st_i.fia, w2_cbusb.fia
Algorithm Ok, MSID: 8495EDC8DE249DDB2657E636E2
Decoded MSID: 3E4EBAF7-00024599-A8000000
Encoded FAID: 91BF8E79-259FBD1B-034AB227
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 00:04
Area3: 0x04000000-0x046FFFFF Erased, Time: 00:04
Area4: 0x06000000-0x0673FFFF Erased, Time: 00:04
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:00
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 09:12
Erasing: 0x00000000-0x0000FFFF ...
Erasing Error: 10, at: 0x00000000-0x0000FFFF, 940101, Time: 00:00
Process Failed, Repowering Mobile
ALSO THE ERASE PROCCESS IS TOO FAST
PLS NEED HELP
NOW WHEN I POWER THE PHONE IT COMES WITH WHITE SCREEN FOR 25 SEC THEN POWERS OFF[/I]
fl0 is faulty please heat the fl0 flash ic and check the result. if not ok then change the fl0 ic .
best regards
