How does PadFinder work with Multi-Box and Multi-Box LITE? Do I need activation?

[.::AZEEM::.]

PadFinder is fully compatible with Multi-box and Multi-box LITE. It means that you can use PadFinder to find the pinout for almost ANY cell phone ( Maxon, Philips, LG, Chinese phones and so on ) or set it manually if you already know the pinout in the phone ( for example, you know the correct pinout on the phone with a new processor ) you can point in the right place and RX / TX pins in two clicks!
 
PadFinder is a really Universal cable-box - can work with all brands!
 
After you have successfully found the pinout, you just run the latest version of the necessary soft ( from the Multi-box or Multi-box LITE's list ) and start working!
 
PROCEDURE OF WORKING WITH MULTI-BOX ( LITE )
 

 
1. Connect PadFinder to PC via an ordinary AB USB cable
2. Connect Multi-box or Multi-box LITE using RG45 Multi-box cable ( comes with the PadFinder cable set ).
* Plug the RJ45 to RJ45 cable into "Special" socket of Multi-box ( LITE ) and "MULTI-BOX CONNECT" socket on PadFinder.
*No need for additional USB connect.
ATTENTION: If connected like this, you must start any service tool of Multi-box ( LITE ) to give supply to PadFinder via RJ45 tyo RJ45 cable. If you don't do this, you won't be able to use PadFinder!
3. Connect the DB26 cable to PadFinder ( "Special" socket ) and to the phone.
4. Find the pinout using PadFinder ( see the manual ) OR use the CLIP function ( see the manual ) to save your time and for more convenience if the phone is MTK-based!
5. Start the appropriate soft of Multi-box ( LITE ) and start working!
 

 
IMPORTANT: No need for any activations to work with Multi-Box ( LITE )!