Medusa Box update news here!!!!!!!!!!!!

[kanniappan]

Medusa Box v.2.4.3 Release Notes:

 

• Added support for the following models:
• LG E980 - added Dead Boot/Device Repair via USB.
  
• LG E980H - added Dead Boot Repair via USB.
  
• LG E985T - added Dead Boot Repair via USB.
  
• LG E986 - added Dead Boot Repair via USB.
  
• LG E988 - added Dead Boot Repair via USB.
  
• LG E989 - added Dead Boot Repair via USB.
  
• Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box v.2.4.3

[kanniappan]

Medusa Box Software v.2.4.5 Release Notes:

     

• Added support for the following models:
• LG D280N - added Dead Boot Repair via USB
  
• LG D280G - added Dead Boot Repair via USB
  
• LG D285 - added Dead Boot / Device Repair via USB
  
• LG D285F - added Dead Boot Repair via USB
  
• LG D285G - added Dead Boot Repair via USB
  
• LG D315 - added Dead Boot Repair via USB
  
• LG D315K - added Dead Boot / Device Repair via USB
  
• Added new Core ID (107180E1) for Qualcomm APQ8064
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.4.5

[kanniappan]

Medusa Box Software v.2.4.6 Release Notes:

     

• Added support for the following models:
• LG D618 - added Dead Boot/Device Repair via USB
  
• LG F240K - added Dead Boot Repair via USB
  
• LG F240L - added Dead Boot Repair via USB
  
• LG F240S - added Dead Boot Repair via USB
  
• Samsung GT-S5302 - added Dead Boot/Device Repair
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair LG D618, F240K / L / S via USB, please follow the next three steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.4.6

[kanniappan]

Medusa Box Software v.2.4.8 Release Notes:

     

• Added support for the following models:
• LG E960 - added Dead Boot / Device Repair via USB
  
• LG F200K - added Dead Boot Repair via USB
  
• LG F200L - added Dead Boot Repair via USB / JTAG
  
• LG F200LS - added Dead Boot Repair via USB
  
• LG F200S - added Dead Boot Repair via USB
  
• Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three next steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.4.8

[kanniappan]

Medusa Box Software v.2.4.9 Release Notes:

     

• Added support for the following models:
• LG D851 - added Dead Boot / Device Repair via USB
  
• LG D620 - added Dead Boot Repair via USB
  
• LG D620K - added Dead Boot Repair via USB
  
• LG D620R - added Dead Boot Repair via USB
  
• ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
• Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three next steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.4.9

[kanniappan]

Medusa Box v.2.5.0 is out!

We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

Medusa Box v.2.5.0 Release Notes:

- Added support for the following models:
LG D852 - added Dead Boot Repair via USB (Beta)
LG D852G - added Dead Boot Repair via USB (Beta)
LG D855 - added Dead Boot Repair via USB (Beta)
LG D855K - added Dead Boot Repair via USB (Beta)
LG D855P - added Dead Boot Repair via USB (Beta)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect  your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB  QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver  yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa Box v.2.5.0

[kanniappan]

Medusa Box Software v.2.5.1 Release Notes:

     

• Added support for the following models:
• LG F160LV - added Dead Boot / Device Repair via USB
  
• LG F160K - added Dead Boot Repair via USB
  
• LG F160S - added Dead Boot Repair via USB
  
• Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot / Device Repair via JTAG
  
• ZTE P752D - added Dead Boot/Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three next steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.5.1

[kanniappan]

Medusa Box Software v.2.5.2 Release Notes:

     

• Added support for the following models:
• LG F160LV - added Dead Boot/Device Repair via JTAG
  
• LG F160K - added Dead Boot Repair via JTAG
  
• LG F160S - added Dead Boot Repair via JTAG
  
• LG F370K - added Dead Boot Repair via USB
  
• LG F370L - added Dead Boot Repair via USB
  
• LG F370S - added Dead Boot Repair via USB
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

 To repair mentioned above devices via USB, please follow the next three next steps:
    

• Attach testpoint as shown on Figure 1 in the Software manual and  connect your phone using Micro USB cable directly into the motherboard’s  USB port (do NOT use any USB hubs!)
  
• Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  
• Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
  

Download Medusa Box Software v.2.5.2

[kanniappan]

Medusa Box v.2.5.4 is out!

We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
and via JTAG for HTC HD7 (PD29100) and Huawei E586!

Medusa Box v.2.5.4 Release Notes:
- Added support for the following models:
LG D165G - added Dead Boot Repair via USB
LG D415RD - added Dead Boot Repair via USB
LG VS870 - added Dead Boot / Device Repair via USB
HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)


To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


[video=youtube;7QVc3RxSgR0]https://www.youtube.com/watch?feature=player_embedded&v=7QVc3RxSgR0[/video]


Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa Box v.2.5.4

[kanniappan]

Added support for the following models:
LG P930 - added Dead Boot Repair via USB
LG LU6200 - added Dead Boot Repair via USB
HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG
Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair LG P930 and LG LU6200 via USB, please follow the next three next steps:

Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
 

Download Medusa Box Software v.2.5.5

[kanniappan]

Medusa PRO v.1.1.2 Release Notes:
- Added support for the following models via eMMC:
LG F460K - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung GT-N8000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung GT-I9205 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SGH-I527M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G357FZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- All pinouts and repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!

[kanniappan]

Dear Octoplus community,
Today we are proud to introduce you a whole new built-in module - the 'Content Extractor'!
This update drastically increases your servicing possibilities, offering such new features as restoring customers data from water drown phones, raw binary forensics and so on and so on, via JTAG or eMMC connection using simple graphical interface! Supporting most of existing file system formats and model-independent it brings a real boost to your repair shop

Medusa PRO v.1.1.3 Release Notes:
- Content Extractor – New Possibilities:
View and save (extract) data (files, directories and volumes) directly from the device trough eMMC or/and JTAG interface
View and save (extract) data (files, directories and volumes) from binary dumps (with Full Flash), which have been read from the device
All popular file systems are supported: ext2, ext3, ext4, NTFS, FAT
Ability to save selected files, directories and volumes on user’s hard drive
Easy extract, view and save contacts
Easy extract, view and save pictures
Easy extract, view and SMS messages
Preview graphic files (and their cache)
Ability to work with pictures and media files using computer’s operation system
Advanced search:
-   Search files in file systems or in binary dumps of the device
-   Search user’s contacts or SMS messages
-   Search file name of found pictures
Easy and intuitive graphical user interface (GUI)

Download :-Medusa Box Downloads - Software, Drivers, Manual