Martech BOX III new product

[kanniappan]

On 02.04.2014 we introduce our new product - Martech Box III.
 
Why a new Box ? You can read here:
 About | Martech Box3 Help
 
 What's new in Box III, which is not on Clip so far:
 
 - Nissan LCN / Opel Corsa Touch & Connect (within the activation OMAP5948) original code reading
- full support (read, write, erase) of M35080 3/6/V6/VP/D80/D160 (under the tab of  programmer)
- new user interface - easier and faster selection of models, more features
- read / erase / write Serial SPI memories likeMX25L160 , W25X32 and F-RAM eg. FM25L04
- RNS 315 original code reading the without the use of expander (procedures work independently without control computer)
- JTAG programmer (in development)
- in many cases, support K / L - Line without external power supply 12V
- K / L support in different voltage ranges from 1 to 15 V (programmable)
- 10 universal I / O lines with programmable logic from 1 to 5 V
- UART and RS232 (separate outputs for RS232 - a standard PC or signal level from -9V ..+ 9V )
- UART in logic from 0 to 15V - max voltage from 1V to 15V
- RS232 with the range of -12V .. +12V
- work on USB power + the ability to work on external power
- possibility to supply external circuits from the box
- Vreg - programmable voltage from 0.5 .. 5V (max voltage dependent on the performance of the computer USB)
- hardware and software support for most protocols OBD ( ALDL , OBD -I,   OBD -1.5 , OBD-II , EOBD , EoBD2 , JOBD , ADR , SAE J1850 PWM , SAE   J1850 VPW , ISO 9142-2)
- device is fully expandable, on the request of customers also
- programmable current protection outputs, IREG (sum of all outputs IO1 .. I08 + RX + TX)
- analog inputs - ADC-A, ADC-B
 
Box III specifications:
- diagnostic DB25 connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
- USB connector
- 9V external power supply connector
- 4 led diodes (BUSY/ERROR, CONNECTION, RX, TX)
- firmware update on the fly (in background, changes came after software close)
- drivers installations directly from windows update xp/vista/win7/win8/win8.1
 
For all Martech Clip users we have possibility to replace Clip into Box III (with moving activations from old to new device).
More details:  [email protected].
 
Regards
 Martech Team
 Martech

[kanniappan]

Martech AMS3 - Box III as Virtual Device
 
Virtual Device - the ability to emulate various interfaces with the specified parameters.
In Tool bookmark you can find:
 
 - TX (K-line),RX(L-line), (range of 0..9V..+12V)
- RX (K-line),TX(L-line), (range of 0..9V..+12V)
- K-line, (range of 0..9V..+12V)
- L-line, (range of 0..9V..+12V)
- UART1, (range of 0..+5V)
- UART1 - inverted, (range of 0..+5V)
- M-Bus (range of 0..+5V)
- RS232 (range of -9V..+9V)
 
After defining and memorizing (the Save button saves the settings in the device), you can close AMS3.
From that moment every time you open com port with previously selected parameters.
The transmission on the selected protocols running stable even at high speeds - 3Mb/s.
To sum up - from now on we can use the Box III as a universal interface to other programs.
 
As a reminder, Box III supports:
 - M35080 ( 3/6/V6/VP )
- M35080 ( D80-DOWQ )
- M35080 ( D160-DOWQ )
All types can be read, write and erase - most importantly in a very short time.
 
 Added models:
 - Honda, 2YA1 MF721R0 BOSE, 39101-S1A-G110-M1, 24C02 by Alpine
- Ford, 6000 CD RDS EON, 98AP-18C815-AC by Visteon
- KIA, B02002, OK588 66 8C0, 24c02
- VW, RCD-300, 1K0 035 186AF, 24C32 by Grundig
- Opel, Touch & Conect MC Corsa EU, 7 612 830 112, 13 362 758 by Bosch (tylko Box III)

Best regards,
 Martech Team.
 Martech