All L.G Pinouts Here!!!!

[kanniappan]

LG 18 pin 510, B1300, G1500, W3000, G3100, G5200, G5220c, G5300,  G5310, G5400, G7100, G7070, G7120 cell phones cable connector pinout
 
 
1 Vbat connected by 1N4001 diode to +5V supply in cable?  
2,3 Charge shorted by 1N4001 diode to pin 1 in cable?
4 PWON shorted to pin 18 (VBAT) in cable?
5,6,15,18 Gnd  
16 Rx  
17 Tx  
 
 
 
 LG 18 pin CDMA cell phones cable connector pinout
 
 
1,18 +  5Vcc
9 Rx    
12 Tx    
15 Gnd  
 
 
 LG 24 pin C1100, C1200, C1300, C1400, C1500,  F2100, F9100, G1600, G5500, G5600, G7000, G7020, G7030, G7050, KG120,  KG210, KG220, KG225, KG320, L1100, L1200, L1400, lx5450, lx5550, T5100,  vi5225, vx4500, vx4600, vx6000 , 4010, 4011, 4050, 8080 cell phones  cable connector pinout
for LG 3G phones (including LG40xx,LG70XX,L11XX and most others with 24 pin conector)
 
 
1 Batt_ID  
2 VPPFLASH  
3 DSR  
4 Vin IGN
5 Vin Charge in, (USB +5V accepted)
6 CTS_ON  
7 PCM_RXA_IN  
8 PCM_CLK  
9 PCM_SYNC  
10 USB RX USB D-  
11 PCM_TXA_OUT  
12,19 GND  
13 DTMS Rx  
14 DFMS Tx  
15 USB Tx USB D+  
16 USB Vcc  
17 CTMS/DCD Serial Rx  
18 CFMS/RI Serial Tx  
20 RFR_RTS CTS?
21,22 + 4.2v charger. Pins 20 and 21 may be used? May be charged from PC USB +5V power
23 CTS_ON RTS?
24 DTS DTR?
 
different sources reports:
pins 3,12,19,23 may be shorted in cable;
pin 6 must be shorted by 10KOm resistor to +5v in cable;
pins 2 and 21 should be shorted (confirmed).
 
CTMS stands for Control To Mobile Station; CFMS stands for Control From  Mobile Station; DTMS stands for Data To Mobile Station; DFMS stands for  Data From Mobile Station
 
 
 
 
 
 LG 300, 330W, 800 cell phones cable connector pinout
 
 
10,17,18 +Battery  
9 Tx Serial Out
12 Rx Serial In
14 DC GND  
 
 
 
 
 LG 500, 600, 601 cell phones cable connector pinout
 
 
Pinout of LG 601. Pins other than Rx, Tx, GND may be differnt.
1,2 GND    
3 jtag(tck)    
4 jtag(tms)    
5 jtag(tdi)    
6 jtag(tdo)    
7 differential SPKoutNegative    
8 differential SPKoutPositive    
9 SPK gnd    
10 SingleEND MIC in    
11 SW Debug UART2(Rx)  used for flashing?  
12 SW Debug UART2(Tx)  used for flashing?  
13,14 GND    
15 HandsFreeKitDetection    
16 ExtDeviceSupplyVoltage(VCC)    
17 RemotePowerON    
18 DataComm(UART1)RXD    
19 DataComm(UART1)TXD    
20 DataComm(UART1)DSR    
21 DataComm(UART1)RTS    
22 DataComm(UART1)CTS    
23,24 BatteryCharging    
25,26 BATT  
 
 
 
 
 
 
 LG B1200 cell phone pinout
 
 
11 Tx    
12 Rx    
17,18 GND  
 
 
 
 LG Chocolate, VX8500, KG800, KG90, KU800 cell phones cable connector
 
 
1,11,18 GND  Also Audio GND from phone  
6,7 USB V+    
4 USB V+ ?  
11 Headset sense?  
12 RX / USB D-  
13 TX / USB D+  
14 Right Audio Out  
15 Left Audio Out  
17 Mic In  
 
For unlock we need usb pinouts, so here is it 100 working tested
 
Pin Signal Description
1,18 GND  black wire
4 USB Vcc  red wire
12 USB D-  white wire
13 USB D+  green wire
 
 
 
 
 LG U8110, U8120, U8130, U8138, U8330, U8360 cell phones cable connector
 
 
19 GND green
18 Tx  white
17 Rx  red
16 Vcc +5v  orange
 
 
Pin 21 shorted with pin 2; pin 19 shorted with pin 12 in serial cable?
 
 
 
USB cable pinout:
 
Pin Pin
Name Description
10 Vcc To USB A Pin 1
12 Data GND (tie to pin 19 earth ground shell)To USB A Pin 4
15 USB D+ To USB A Pin 3
16 USB D- To USB A Pin 2
 
 
 
 
 LG VX/LX 4400 pinout
 
 
1 Vbatt  
9 Rx  
12 Tx  
14 GND Ground
15 GND Ground

[kanniappan]

Here is KP130 Pinouts
 
keyboard top
1.........18
1: Gnd
2: phone Rx (RJ45 pin-2)
3: phone Tx (RJ45 pin-3)
5: Gnd
15: Gnd
18: Gnd

[kanniappan]

KE500 Pinouts Here
 
18.............1
 
17 - RX (data to phone)
16 - TX (data from phone)
1,4,14,18 - GND

[kanniappan]

K.g 300


 
 
 4 = GND
 3 = RX
 2 = TX