select "emergency mode connection " when phone not connected
use these file to flash
w210_Main_1.2.13.B2M.bin
w210_LPH_A67_A1_12130_En_Cn.B2P.bin
w210_Flex_FF_A67_0301_1700.B2F.bin
COM6 [VCP0] selected
Device: Motorola-W210
Checking data, wait...
connection mode: "Emergency mode" connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 89885500010001:89885500000000
flash: Intel 28F640W30-B B 8Mb
Release Power button now !
Initialize Done
Set baud...
115200
Set baud Done
Check parameters...
flash: 89885500010001:89885500000000
reading [Motorola-W210_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\Motorola-W210_eeprom_20100707-132558.B2E.bin
software version: 1.0.04.
flex version: FF_A67_0101_1408
LP version: LPH_A67_ASIA2_018
hardware version: MOTOROLA_A67
ESN: 147C54A4
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Firmware
flash: 89885500010001:89885500000000
Write: Firmware
"safe mode" active
Area: Flex/Customization
flash: 89885500010001:89885500000000
Write: Flex/Customization
Area: Language pack
flash: 89885500010001:89885500000000
Write: Language pack
Write Done
Finished, time used: 701 sec
Remove/Install battery now !
after that this one using chinece language
for english
centre button 1 time (menu )
down button 1 time (setting )
centre button 1 time selectinf setting )
down button 5 time (initial setup )
centre button 1 time (seleting initial setup )
down button 4 time (language)
centre button 1 time (selecting language )
down button 1 time ( english )
centre button 1 time (selecting english )
thats all
thanks to infinity team
