Gsm Hardware & Software Section > Lyf

LYF-LF2403N blinking ,logo done tested me

(1/1)

kanniappan:
LYF-LF2403N blinking ,logo done tested me







How to Flash LYF Jio LF 2403n:



1- Download LYF LF 2403n Flash file which consist of File, tool & Driver.

2- Install Driver

3- Connect Phone in OFF mode to cross check driver installation & Press * & # while connecting. It will make port named “Qualcomm HS-USB Diagnostics 9008”

4- It means driver has been installed successfully.

5- Install Flash Tool, which will install shortcut on Desktop named QFLASH Tool. place your firmware on desktop

6- Connect phone & Click on Load Content and from Flash File Folder select Content.xml

7- It will show Port in tool.

8- Click on Download Content to start Upgrading.

9- Wait till done appears.

10- After upgradation, device will shift to download mode.

11- Disconnect Phone & reinsert battery.
 :) :) :) :)


LInk :- https://www.mediafire.com/file/k62stlcx408t5j6/LYF-LF2403N-001-02-14-230818_Serviceteam.rar/file

Navigation

[0] Message Index

Go to full version