Author Topic: Video how to read ASK File to get a Working RPL File  (Read 5952 times)

mani6

  • Administrator
  • Hero Member
  • *****
  • Posts: 2408
  • Karma: +11/-0
    • View Profile
    • http://www.srimeenakshimobiles.net/forum/
Video how to read ASK File to get a Working RPL File
« on: April 03, 2008, 01:56:51 PM »

 
 
 
RPL files are special files for Nokia phones, that helps you to repare some software problems such as :
  • Corrupted IMEI Certificate (NPC)
  • Corrupted Simlocks (Contact Retailer)
  • Phone switches off after 3 minutes (secure WD reset)
  • Blocked phone unlock counter
Common symptoms to show corrupted data:
  • Contact Retailer( ST_SECURITY_TEST failed, SIM_LOCKS_TEST failed)
  • IMEI number shown as default: 123456789012345
  • Switch off after 3 seconds, missing or invalid NPC certificate will cause reset of the RAP3 WD
  • Not working Transmitter/Receiver or Not Charging (those could be caused by faulty HW also!)
Follow this Step-by-step to read your ASK file :
 
 
  • Install '' Nokia Connectivity Cable Driver ''
  • Open " BB5 reader ", to read the ASK file
  • Connect your Nokia using a USB cable (phone must be ON)
  • Click on " Connect ", phone will connect to the Software
  • Click on " Read ASK "
for more help, check the video attached :)

Use any tool to read ASK file from DCT4+ phones ;)

Srimeenakshimobiles

Video how to read ASK File to get a Working RPL File
« on: April 03, 2008, 01:56:51 PM »

 

SimplePortal 2.3.7 © 2008-2021, SimplePortal