Release Date: 21/08/2013 WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite. DCTxBB5 v2.3.0.1
----------------- 1. Updated UFS Drivers Support.
LG_GSM v2.3.0.1
----------------- 1. Infineon Bug fixed (present in V 2.3.0.0)
2. Added access to UFST [PWR-R/T] Port (UART Rx,Tx)
SAMs v2.3.0.1
-------------- SWIFT-AEROFONE
C3262,S3332,S3570,S3572 added (UNL,SECT,IM,FL)
SWIFT-3G
A157 IMEI Rebuild fixed.
INFINEON
Infineon Bug fixed (present in V 2.3.0.0)
S3800W added (CUNL,PUNL,PIM,FL,UFL)
COMMON
Fixed "UFSx Devices not Found" on USB 3.0 Host Controller.
SeDBx v2.3.0.1
-------------- 1. Updated UFS Drivers Support.
Many thanks to all those who have supported us!!!UFSx_Support_Suite_Setup_v02.03.00.02 DHLT Files - Samsung Fast Code Calc Tables
Download _DHLT.part01.exe Download _DHLT.part02.rar Download _DHLT.part03.rar Download _DHLT.part04.rar Download _DHLT.part05.rar Download _DHLT.part06.rar Download _DHLT.part07.rar 1. Uninstall
ALL previous versions, you
MUST uninstall
HWK Suite BEFORE trying to uninstall
HWK Support Suite Setup.
2. Install
UFSx Support Suite Setup 3. Connect your UFSx+HWK before running the UFSx Control Panel
4. Run UFSx Control Panel
5. Switch to the "Hardware" Tab
6. If you only have one UFSx connected it will be selected, if more than one, select the check box next to the required UFSx. You can click "
Scan Boxes" to refresh the list if you have connected further boxes since opening the Control Panel
7. Click "
Check Box"
8. Click "
Update Box"
9. Click "
Check Box" - Make sure "Box Status" = "True" or "Bad Software" and "Server Status" = "Support Ok", before proceeding
10. Switch to the "Software" Tab
11. Amend "Application Install Path" and/or "Nokia Install Path", if required.
12. Click "
Check Server"
13. Click "
Install"
14. If you have more than 1 UFSx+HWK run steps
5-
13 for each UFSx+HWK (
NOTE: You must install something at step 13)
How to install same UFSx+HWK to 2nd PC. Same as above and you must complete
ALL steps.
How to add further UFSx+HWK after initial install. Steps
4-
13 as above
