Easy-JTAG Update News here !!!!!

[kanniappan]

Easy-JTAG Daily Updates v1.0.95.0 & v1.0.96.0, box firmware 1.48
 
 
 BOX Firmware Update:
The firmware of box updated to 1.48 version.
You can update it via shell  or use latest build 1.0.95/96.
Firmware will be updated automaticaly.
In firmware update - improved emmc direct protocol, more stable now.
 
Emmc Direct changes:
 
 Added:
-  access to boot2 , gp1 , gp2 , gp3 and gp4 partitions. You will know soon why need this
- Improved stability of writing some eMMC devices
- NVIDIA Tegra 3 devices are now fully supported ( we working now on sec bypass)
 
ADDED new devices/phones via JTAG connect:
 
- Anycall SHW-m200K (Read/Write,OneClickRepair)- LG D500 (Read/Write,OneClickRepair)- HTC one XL PJ831000 (Read/Write,OneClickRepair)

[kanniappan]

Easy-JTAG Daily Update. 1.0.97.0 Small update.
 
 
Added via JTAG.
 
- support GT-S5230M(S523M) micron (Read/Write/OneClickRepair)
 
Fixed:
 
 - Box error ...

• . this error was  on some PC.

- Fixed drivers issure installation on some PC.

[kanniappan]

Easy-JTAG Daily Update. 1.0.98.0 Update.


Added via JTAG.

- support GT-i9505 MKF android 4.3 (OneClick Boot repair)
- support SGH-i337 MK2 android 4.3 (OneClick Boot repair)
- support SGH-i337 MK2 android 4.3 EFS one click repair (only for phones with good hardware )
- support GT-S5570 EFS one click repair (only for phones with good hardware )

[kanniappan]

EASY-JTAG 1.0.99.0 NEW YEAR - NEW REVOLUTION SOLUTION FOR repair/rebuild  emmc
 
 New  YEAR - new Generation of EMMCtool engine  comming, while others doing  fake updates with hundreds  uploaded files,  we did some research and now  we have ready for public release new  REVOLUTION SOLUTION for emmc  repair!!
YES YES. Exactly now we can repair lot of broken SAMSUNG EMMC chips with different internal firmware problems!!!
 
EMMC Tool improvements step by step:
 
1. Added SMART report  (Samsung emmc only).
   This function allow to check status of samsung emmc also see bad block couters all same like in SSD.
 
2. Added SMART WIPE format function ( WIPE almost any samsung eMMC card) - !!!!!!!!!
 After smart format EMMC back TO FACTORY CONDITION
   This function can:
     - back to live almost any samsung emmc:
     - can fix permanent PROTECTION FLAG (UNWRITABLE MMC).
     - can remove VENDOR BOOT DOWNGRADE PROTECTION!!!! <<<< Yes. Now you can downgrade boot and phone will work!!!!
     * Samsung SMART WIPE AVAILABLE ONLY FOR SAMSUNG EMMC with latest FW revisions.
3. Added moviNAND erase function.
4. Added TRIM Erase function ( may be long but work on all eMMC cards ).
5. Added display size of BOOT1 BOOT2 RPMB areas.
6. Fixed eMMC fw revision display.
7. Fixed bugs with stop button.
8. Improved connection stability.

[kanniappan]

EASY-JTAG 1.0.100.0 New update, new solutions inside
 
 Added via JTAG connect:
 
- support  LG P350 (Read/Write,OneClickRepair)
- support LG CT710H (Read/Write,OneClickRepair)
- support  ZTE TANIA (Read/Write,OneClickRepair)
 
Added via EMMC DIRECT(ISP) connect:
- Possibility edit boot's size
- Possibility edit RPMB size
- EMMC MBR Partition - Reading Information Dump
- EMMC GPT Partition - Reading Information Dump

[kanniappan]

EASY-JTAG 1.0.100.0 New update, new solutions inside
 
 Added via JTAG connect:
 
- support  LG P350 (Read/Write,OneClickRepair)
- support LG CT710H (Read/Write,OneClickRepair)
- support  ZTE TANIA (Read/Write,OneClickRepair)
 
Added via EMMC DIRECT(ISP) connect:
- Possibility edit boot's size
- Possibility edit RPMB size
- EMMC MBR Partition - Reading Information Dump
- EMMC GPT Partition - Reading Information Dump

[kanniappan]

Added via DIRECT EMMC(ISP) connection:


Tegra 2 / Tegra 3 emmc partition show info. (will be very useful who like to play with new solutions/for professional jtaggers)


Log

NVIDIA TABLE detected...
Boot RVA Correction : 400000
Header ID: 1539A8823256C88A91C856522953C855
Warning: Header Size = 2240
Warning: Entries Count = 27
MMCBLK0P0 (BCT) Adress in BOOT1+BOOT2 0x0, Length: 0x400000
MMCBLK0P1 (PT) Adress in USER: 0x0, Length: 0x200000
MMCBLK0P2 (EBT) Adress in USER: 0x200000, Length: 0x400000
MMCBLK0P3 (DIA) Adress in USER: 0x600000, Length: 0x400000
MMCBLK0P4 (BIF) Adress in USER: 0xA00000, Length: 0x200000
MMCBLK0P5 (GP1) Adress in USER: 0xC00000, Length: 0x200000
MMCBLK0P6 (WLN) Adress in USER: 0xE00000, Length: 0x600000
MMCBLK0P7 (WDM) Adress in USER: 0x1400000, Length: 0x200000
MMCBLK0P8 (RCA) Adress in USER: 0x1600000, Length: 0x600000
MMCBLK0P9 (LNX) Adress in USER: 0x1C00000, Length: 0x800000
MMCBLK0P10 (SOS) Adress in USER: 0x2400000, Length: 0x800000
MMCBLK0P11 (PG1) Adress in USER: 0x2C00000, Length: 0x1000000
MMCBLK0P12 (PG2) Adress in USER: 0x3C00000, Length: 0x1000000
MMCBLK0P13 (PG3) Adress in USER: 0x4C00000, Length: 0x1000000
MMCBLK0P14 (SIF) Adress in USER: 0x5C00000, Length: 0x400000
MMCBLK0P15 (SP1) Adress in USER: 0x6000000, Length: 0x400000
MMCBLK0P16 (RV1) Adress in USER: 0x6400000, Length: 0x1C00000
MMCBLK0P17 (APP) Adress in USER: 0x8000000, Length: 0x50000000
MMCBLK0P18 (CAC) Adress in USER: 0x58000000, Length: 0x14000000
MMCBLK0P19 (ISD) Adress in USER: 0x6C000000, Length: 0x2A2000000
MMCBLK0P20 (UDA) Adress in USER: 0x30E000000, Length: 0x89400000
MMCBLK0P21 (DUM) Adress in USER: 0x397400000, Length: 0x200000
MMCBLK0P22 (MSC) Adress in USER: 0x397600000, Length: 0x200000
MMCBLK0P23 (RFS) Adress in USER: 0x397800000, Length: 0x600000
MMCBLK0P24 (DLG) Adress in USER: 0x397E00000, Length: 0x1600000
MMCBLK0P25 (PDT) Adress in USER: 0x399400000, Length: 0x200000
MMCBLK0P26 (GPT) Adress in USER: 0x399600000, Length: 0x200000
Done...Presets has been updated...
Done.

Added via JTAG interface:

- support SGH-i677 (Read/Write,OneClickRepair) - First in the world
(pinout was founded by exclusive EASY-JTAG FINDER)
- addition support GT-i9070 (One click EFS/Modem restore) - for repair unknown baseband problems*
- addition support GT-i9000 (One click EFS/Modem restore) - for repair unknown baseband problems*
- addition support GT-i8190 (One click EFS/Modem restore) - for repair unknown baseband problems*
- addition support GT-i8190N (One click EFS/Modem restore) - for repair unknown baseband problems*
- addition support GT-S5300 (One click EFS/Modem restore) - for repair unknown baseband problems*
- upload Lumia 520 new version of RCP file. (1.02)

*One click EFS/Modem restore - this function will work only if phone have working hardware.

[kanniappan]

Easy-JTAG Update 1.0.102.0 - First in the world. new phones, new functions.
 
 Added via JTAG connection:
 
    -    support HTC BUTTERFLY S PO6821000 (Read/Write/One click boot repair)
    -    support LG US780 (Read/Write/One click boot repair)t World First
    -    support Samsung SCH-R970 UEMK2 (Read/Write/One click boot repair) - World First
    -    support Samsung SGH-I337M UEMK6 (Read/Write/One click boot repair) - Word First
 
 Added via DIRECT EMMC(ISP) connect:
 
New phones:
 
    -    DIRECT EMMC SM-N900 (Read/Write ROM1/2/excsd) - World First
    -    DIRECT EMMC GT-N5100 (Read/Write ROM1/2/excsd) - World First
 
New function added:
 
    -    changing Boot partition config -  World first
    -    changing Boot with config - World first

[kanniappan]

Added via JTAG connection:
 
- support LG E420 (Read/Write/One click boot repair)
- support LG E410 (Read/Write/One click boot repair)
- support HTC DESIRE 601 04PE210 (Read/Write/One click boot repair)
 
 Added via EMMC Direct connection (ISP):
 
- support GT-I9305 (Read/Write ROM1/2/excsd)
- support GT-I9152 (Read/Write ROM1/2/excsd)

[kanniappan]

Easy-JTAG Daily Update 1.0.104.0 - lot of HTC, Direct  emmc  new models
 
 Added via JTAG interface:
 
- support HTC Desire SV PM86100 (Read/Write/One click boot repair) - thnx to Reza
- support HTC SENSATION XL PI39200 (Read/Write/One click boot repair) - thnx to Reza
- support ZTE V9C (Read/Write/One click boot repair) - thanks to AMIT
 
Added via EMMC Direct (ISP) connect:
 
- support KARBON A15 (Read/Write ROM1/2/excsd)
- support Samsung GT-I8530 (Read/Write ROM1/2/excsd) - thanks to Babak N.

[kanniappan]

Easy-JTAG Daily Update 1.0.105.0 - HTC, Samsung, Huawei modem
 
 Added via JTAG interface:
 
- support HTC_ONE_XL_PJ8350000 (Read/Write/One click boot repair) - thnx to Reza
- support Samsung SGH-i537 (Read/Write/One click boot repair)
- support Huawei E171 modem(Read/Write/One click boot repair)

[kanniappan]

Easy-JTAG daily Update. 1.0.107.0
 
 Added via JTAG connection:
 
- support Cherry mobile Rave (Read/Write)
- support Cherry mobile BURST  (Read/Write)
- support Cherry mobile FLARE2  (Read/Write)
 - support Huawei Y300-0100 (Read/Write/One click boot repair) - thnx to Reza
 - support Alkatel OT-995 (Read/Write/One click boot repair)
 
 Added via Direct EMMC connection:
 
- support Motorola MB865 (Read/Write Rom1/2)
- support Samsung GT-I9100 (Read/Write  Rom1/2)
 
 Changes in GUI:
 
-  added GUI MULTIlanguage support
manual how to create own language pack

[kanniappan]

Easy-JTAG daily Update. 1.0.108.0
 
 Added via JTAG connection:
 
- support Huawei U8650 KS Aqua (Read/Write)
- support Huawei U8650 Sonic  (Read/Write)
 - support HTC ONE m7 (HBOOT 1.56.00 4.4.2 kitkat) (Read/Write/One click boot repair)
- support HTC Thunderbolt ADR6400VW (Read/Write/One click boot repair)
 
  Added via Direct EMMC Connect (ISP)
 
- support Samsung GT-i9308 (Read/Write/ Rom1/Rom2, excsd)
 - support ASUS TF101G (Read/Write/ Rom1/Rom2, excsd)

[kanniappan]

Easy-JTAG 1.4.0.0 - one of most wanted update for EASY-JTAG from begin.
 
 DIRECT EMMC connect (ISP) speed increased to amazing values!!
 
1 month of our job and new Update released:
 
Now you can be SURE - you have fastest DIRECT EMMC writing in gsm word.
 
 Main changes:
 
- HIGH speed EMMC Direct core 2.0 Released
- New Box Firmware Released 1.50
- New algorithm for reading /writing with long wires!! <--------
- Auto repeat read/write (if connection losed/or error while job)
- More stable connection and fast EMMC detect
- MOVINAND firmware dump backup
 
- Speed of reading increased UP to 6 times.
- Speed of writing increased UP to 20 times!!!!! Yes Yes. incredibly!!!!
 
 New phones added via JTAG connection:
 
- support LG F180L (Read/Write/One click boot repair)
- support LG F180S (Read/Write/One click boot repair)
- support HTC One SV C520e ( PL80130 )(Read/Write/One click boot repair)
- support ZTE V8000 (Read/Write/One click boot repair)
 
 New phones added via DIRECT EMMC (ISP) connection:
 
- support Samsung GT-P1000 (Read/Write/ Rom1/Rom2, excsd)
- support Samsung SGH-T929 (Read/Write/ Rom1/Rom2, excsd)
- support Samsung SCH-W2013 (Read/Write/ Rom1/Rom2, excsd)
- support Samsung SCH-W999 (Read/Write/ Rom1/Rom2, excsd)
- support Samsung GT-S7562 (Read/Write/ Rom1/Rom2, excsd)
- support Samsung GT-S7568 (Read/Write/ Rom1/Rom2, excsd)
 
- support Sony LT29I (Read/Write/ Rom1/Rom2, excsd)
- support VIVO X1W (Read/Write/ Rom1/Rom2, excsd)
- support Xiaomi 2A (Read/Write/ Rom1/Rom2, excsd)
- support Xiaomi 2S (Read/Write/ Rom1/Rom2, excsd)
- support Xiaomi M1 (Read/Write/ Rom1/Rom2, excsd)
- support ZTE U960 (Read/Write/ Rom1/Rom2, excsd)
 
 
 P.S. While you downloading and playing with new speed ISP core, we cooking something new
and also very HOT Be ready FOR THIS!
 
P.S2. Do you have not supported phones, want help us to research new updates, come to easy-jtag section.

[kanniappan]

EASY-JTAG Update. 1.5.0.0. Easy-jtag 1 year Birthday update. Boom & Exclusive Update.


YES. Most wanted solution for n7100,i9300.
Now you can repair 90% of all bad EMMC VTU00M.



First in the world

We have done our next big solution:


- Repair EMMC VTU00M rev 0x56, name:0000 repair!!! (intermal firmware emmc fix) - repair stage 1
- Repair EMMC VTU00M rev 0xF1 not operable for read and write operation (intermal firmware emmc fix) - repair stage 2

VTU00M with name 0000 repair require two stages:
- repair mode 1 can recover emmc name
- repair mode 2 can recover emmc normal read/write functionality
between those two modes emmc require reconnect power


HOW TO:

if you have VTU00M with non damaged name but not operable for read/write only repair mode 2 need to do.

After press ‘VTU00M repair' all related operation for repair or  selection repair mode 1 or repair mode 2 will apply automatically
just read carefully log when requested EMMC power reconnect.

After success repair (when repair mode 2 done) emmc vtu00m can be checked with S.M.A.R.T report function
If smart report is normal and not invalid emmc i fully operable!!!
Just change correct rom2/rpmb size if needed
Make emmc bootable (set boot config 0x48, boot bus config 0x1)
Write rom1 and rom2 partition and phone are ready for odin flashing
Enjoy


P.S. vtu00m emmc with 'ready timeout error' can not be recovered anymore - totally dead EMMC.

P.S2 . Easy-jtag users, lets make money.
If you not have easy-jtag, make oder EASY-JTAG from your resellers today!!!!
Poll up your dead EMMC VTU00M.

P.S3. Someone still think exist BETTER and FASTER EMMC TOOL in market