« previous next »
Pages: [1]

Author Topic: 1600 failed in CNT  (Read 6597 times)

nazirna

  • Newbie
  • *
  • Posts: 6
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« on: January 09, 2008, 08:44:19 PM »
TRY ALL AVILABLE VERSION TO 1600.BUT THE PRECCES GOING TO CNT.IT IS GOING TO FAIL.I ALSO CHECK UI SETTING BUT UI SETTING IS ALSO FAIL.I COPY THE FLASHING PROCCES BELOW
st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.57.0
Algorithm Ok, MSID: 84D7F78EFFF205CC445C5232F4
Decoded MSID: 3E4EBAE9-0055C6E5-AA000000
Encoded FAID: 718C542E-50A06676-15A50CE6
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:29
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:10
Area1: 0x01380000-0x013BFFFF Erased, Time: 00:01
CNT Flashing Completed, Time: 00:00
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile
Logged

Srimeenakshimobiles

1600 failed in CNT
« on: January 09, 2008, 08:44:19 PM »

Remax

  • Administrator
  • Sr. Member
  • *****
  • Posts: 424
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #1 on: January 10, 2008, 02:44:10 AM »
Did you use or try another cnt file???
Regards
Logged
Don\'t spam just click THANKS button

jhox2

  • Newbie
  • *
  • Posts: 5
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #2 on: January 10, 2008, 08:43:15 AM »
sir try to flash it without cnt then post result.
Logged

Srimeenakshimobiles

1600 failed in CNT
« Reply #2 on: January 10, 2008, 08:43:15 AM »

nazirna

  • Newbie
  • *
  • Posts: 6
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #3 on: January 10, 2008, 04:59:44 PM »
Quote from: jhox2;6075
sir try to flash it without cnt then post result.
without cnt the flashinf is secsessfully complete but ui setting is not working
Logged

sundar

  • Administrator
  • Hero Member
  • *****
  • Posts: 15190
  • Karma: +10/-0
    • View Profile
    • http://www.srimeenakshimobiles.com
1600 failed in CNT
« Reply #4 on: January 10, 2008, 05:20:09 PM »
ui setting not succeed means try this 2 solution 1st full erase and than flash with latest version MCU+PPM+CNT and than write gud pm if not solved just reheat the flash ic slightly with some flux and than try again flashing........................
Logged
Always TAG your threads
  • Download all the schematics here Direct download
  • Stay connected with Srimeenakshimobiles on

MumbaiGsm

  • Newbie
  • *
  • Posts: 12
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #5 on: January 10, 2008, 11:44:33 PM »
if u have jaf then try to full erase and flash+pm+unlock

if not work then remove two components above batt. connector and flash

wbr...
Logged

abner

  • Global Moderator
  • Full Member
  • *****
  • Posts: 158
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #6 on: January 11, 2008, 04:58:02 AM »
Quote from: nazirna;6065
TRY ALL AVILABLE VERSION TO 1600.BUT THE PRECCES GOING TO CNT.IT IS GOING TO FAIL.I ALSO CHECK UI SETTING BUT UI SETTING IS ALSO FAIL.I COPY THE FLASHING PROCCES BELOW
st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.57.0
Algorithm Ok, MSID: 84D7F78EFFF205CC445C5232F4
Decoded MSID: 3E4EBAE9-0055C6E5-AA000000
Encoded FAID: 718C542E-50A06676-15A50CE6
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:29
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:10
Area1: 0x01380000-0x013BFFFF Erased, Time: 00:01
CNT Flashing Completed, Time: 00:00
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile



Fullerase first then try to flash again without cnt (MCU+PPM only) if same problem do the procedure of our ADMIN Sundar





br
Logged

kashif_khatri

  • Jr. Member
  • **
  • Posts: 81
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #7 on: February 14, 2008, 11:51:29 PM »
I Think Abner Is Write , Try Abner Solution
Logged
________________________________________
BR:
MOHD KASHIF KHATRI
________________________________________
Use Thanks buttons to say thankyou or your post will be deleted.
Spamming is not allowed.. Spamming po

waseem0687

  • Newbie
  • *
  • Posts: 7
  • Karma: +10/-0
    • View Profile
Extract Content Pakage failed
« Reply #8 on: August 24, 2011, 10:13:41 AM »
It is Flash IC fault.:confused:
Logged

waseem0687

  • Newbie
  • *
  • Posts: 7
  • Karma: +10/-0
    • View Profile
use this step
« Reply #9 on: September 29, 2011, 04:57:13 PM »
cover right side last software tips point.and flash 100%work.
Logged

jeevancellworld

  • Global Moderator
  • Full Member
  • *****
  • Posts: 134
  • Karma: +10/-0
    • View Profile
1600 failed in CNT
« Reply #10 on: October 04, 2011, 11:55:23 AM »
Quote from: abner;6128
Fullerase first then try to flash again without cnt (MCU+PPM only) if same problem do the procedure of our ADMIN Sundar





br


If u seen the test mode or local mode when flashing first step then only the cnt file will extract ... other wise try to flash with jaf with easy cable...if u done full flash and full factory method done .. the set will be on condithion .. other wise nothing will happen:eek:
Logged

Srimeenakshimobiles

1600 failed in CNT
« Reply #10 on: October 04, 2011, 11:55:23 AM »
Pages: [1]
« previous next »
 
SimplePortal 2.3.7 © 2008-2025, SimplePortal