Author Topic: Touchscreen (Read 3456 times)

logesh_ashok · « **on:** January 06, 2009, 09:49:58 AM »

I have a china phoneN958.When i start the phone the display appears as follows.Calibration wizard you have to calibratethe touch screen with your styllusto start calibration.
After this display appears no other keys work. What is the problem, and how can i solve this. Thanks in advance.

Srimeenakshimobiles · « **on:** January 06, 2009, 09:49:58 AM »

sundar · « **Reply #1 on:** January 06, 2009, 11:38:43 AM »

u have to solve this by using infinity calibration option or u have to change the touch screen

logesh_ashok · « **Reply #2 on:** January 07, 2009, 09:10:02 AM »

Iwill try with touch screen first. Thank you

Srimeenakshimobiles · « **Reply #2 on:** January 07, 2009, 09:10:02 AM »

antamidhya · « **Reply #3 on:** June 30, 2009, 09:14:15 AM »

Am getting an option "Press Left Soft key to unlock" instead of "Slide to Unlock".

I have a Chineese iphone V51. Its a total touch screen with only one button below the screen to end a call and other one at top to switch off the phone. I connected it to my PC quite often and was working fine for 10days. But when I pulled off the usb cable one day, the phone got dead and didn't start. I took it to a repairer who managed to switch on the phone complaining of some IC problem, but he couldn't bring it to normal even after flashing. The phone standby screen is as was before, but it doesn't respond to touch, and on pressing the center button, it says "Press Left Soft key to unlock". He says I need to get a new touch screen for Rs.800. But, what I feel is, he has loaded the wrong software and there's no problem with touch screen.

I was able to accept a call using touch screen for onetime since then and not now. After getting a missed call, touching the screen lights on and shows me the no. of missed calls, but doesn't respond to touch on "OK" or "Back" options. So what could be my problem? Its only a 10 day old phone its really paining me to see it dumb.

The phone details i got on pressing on *#66*# when it was working normal:
[Version]
E800_XYZ1F11NTV.00.1
[BRANCH]: GEMINI
BUILD: BUILD_NO
SERIAL#:E80001070106793
[BUILD TIME]
2008/12/03 09:27

BB Chip: MT6225, E05
DSP Code: 2006.06.14
DSP Patch:1.0
MS Board: EVEN6225_GEMINI_HW

I want to know is the problem with software or touch screen?
Can I flash a china mobile myself using PC?
Who can help me in hyderabad?

Srimeenakshimobiles · « **Reply #3 on:** June 30, 2009, 09:14:15 AM »

Srimeenakshimobiles

News: