I'll share here all the pictures and the method, that can help you easily connect your China phone and more than that, Samsung, Sie, OKWap, LG, Innostream...can connect to PC, to flash, Unlock, Read, Write, Format(China Phone option only
Prepare:
-01 USB cable, that has USB to Virtual COM card, using PL-2303, ARK3116S, or C261 USB Cable, that you have it with driver( These cables packed with some kinds of phone)
-01 RJ-45 port, that you can buy at Computer service or from a discard LAN Card or Net switch, or box, PC mainboard..
Doing:
For easy to explain, I'll use PL-2303. And to take all advantage of UFS cable kit, we make all kind of phone self-made Cables following UFS standard, so that, we can use UFS cable with this Virsual COM, like C19x Moto, 2xx Sie, 4xx Sie...
Solder RX, TX, GND as this Picture:
Note:
You need no to connect 1 and 8 (B+)! I do it, for UFS Nokia Cable only!
All done of the main part!
For the other part(Connect to phone part), you can use Connector from USB cable of the phone, Dead Charger to modify them, that fix the pinout of the phone you want to flash.
Then, using nutcracker make the male RJ-45 (Following UFS cable standard) for each kind of the phone. The result is here:
And some MP4, sefl-made cable, that work with USB Adaptor modified above:
