Chinese Miracle-2 Success Report

[kanniappan]

Karbonn-user code reset-mtk 6260
Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : C30C19B734D0666A303FEA04CC1F68B6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized

• : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000

• : FLASH_LEN : 0x00300000

SDS : 0x002FE000 , 0x00002000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:16

[kanniappan]

Mtk -625a format don
Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : AC1CC5725A4D8E558EB0CC5B3859A30B
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized

• : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000

• : FLASH_LEN : 0x01000000

SDS : 0x00000000 , 0x00000000

Backup exists , skip
Executing FFS FORMAT now...
FAT_RANGE : 0x00DE0000-0x00FFFFFF , LEN : 0x00220000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:09

[kanniappan]

Mtk-6260 format don

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 17 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : D2E86B7D073CFC439D647720B73AC6C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : 2C00 CB00 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized

• : FLASH_VEN : 0x00EE , [Numonyx] N25W128
[0] : FLASH_DIE : 002C 00CB 0018 0000

• : FLASH_LEN : 0x01000000

SDS : 0x00000000 , 0x00000000

Backup exists , skip
Executing FFS FORMAT now...
FAT_RANGE : 0x00E60000-0x00FFFFFF , LEN : 0x001A0000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

[kanniappan]

Wootel w200

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000

• Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32

• Flash CAP : 00400000

Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

[kanniappan]

yxtel-a2202
==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000

• Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32

• Flash CAP : 00400000

Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

[kanniappan]

Micromax-x455
==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000

• Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128

• Flash CAP : 01000000

Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

[kanniappan]

micromax 088



Operation : Read User Code [ v0.07 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 137 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000

• Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32

• Flash CAP : 00400000

Check data... Can take some time

User Code : 72545

Done!

Elapsed: 00:00:12

Reconnect Power/Cable!

[kanniappan]

samsung e1282t format ok 1000000000000000000%
Card found: S/N BC21:0126
Chinese Miracle II [SPD module] v 0.07

Operation : Format File System [ v0.07 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 47 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 0000

• Flash DIE : 00EF 0060 0018 0000
[0] Flash VEN : Winbond , W25Q128

• Flash CAP : 01000000

Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:01:33

Reconnect Power/Cable!