« previous next »
Pages: [1]

Author Topic: ---no network---  (Read 2295 times)

cjaysern

  • Newbie
  • *
  • Posts: 3
  • Karma: +10/-0
    • View Profile
---no network---
« on: October 08, 2007, 08:11:17 PM »
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: 752523F50CF77C0C0E2D8660534E52EDD27A38B5
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000352
Asic Public ID: 12A001153D9449511B084CE3896C1F725FD14B13
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.14.02 -> Revision: 0000
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.21.00 -> Revision: 0000
Patching APE boot step2...
Error loading ape boot...





my n70 no network.... then i wan try to rewrite the pm n mcu... bt i having this error.....
Logged

Srimeenakshimobiles

---no network---
« on: October 08, 2007, 08:11:17 PM »

.::AZEEM::.

  • Administrator
  • Sr. Member
  • *****
  • Posts: 293
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #1 on: October 08, 2007, 09:05:53 PM »
Quote from: cjaysern;481
Booting phone...
APE Boot Data:
Asic ID: 17100701
Asic Mode ID: 00
Asic Public ID: 752523F50CF77C0C0E2D8660534E52EDD27A38B5
HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
ROM ID: AB5E4ADB27A06946

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000352
Asic Public ID: 12A001153D9449511B084CE3896C1F725FD14B13
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.14.02 -> Revision: 0000
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.21.00 -> Revision: 0000
Patching APE boot step2...
Error loading ape boot...





my n70 no network.... then i wan try to rewrite the pm n mcu... bt i having this error.....



u can use 7 pin cable ????

if yes so try ufsxhwk
cozz jaf bb5 phone many bogs

Logged

badz747

  • Newbie
  • *
  • Posts: 23
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #2 on: October 09, 2007, 06:38:57 AM »
yes sir....use 7pins cable...........
Logged

Srimeenakshimobiles

---no network---
« Reply #2 on: October 09, 2007, 06:38:57 AM »

abner

  • Global Moderator
  • Full Member
  • *****
  • Posts: 158
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #3 on: October 09, 2007, 07:51:34 AM »
Quote from: cjaysern;481

my n70 no network.... then i wan try to rewrite the pm n mcu... bt i having this error.....

solution: change the part shown below, 100% tested by me






br
Logged

abner

  • Global Moderator
  • Full Member
  • *****
  • Posts: 158
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #4 on: October 09, 2007, 07:58:51 AM »
if still no signal here's the another solution


this is also 100% working solution (n70 no network )



br
Logged

Qmad3

  • Newbie
  • *
  • Posts: 47
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #5 on: October 16, 2007, 10:22:04 AM »
why writing pm sir? did you erase the content of your unit. your just making it worst sir. i suggest dont write pm on bb5 unit unless you back it up from the original pm of yuor unit. writing pm from another unit is very dangeruos will  cause your unit to the state of four locks. most cases no signal in not came from software . this is a hardware problem. most of this is by checking volts or the capacitance in the omhmeter. the hinku the coil antenna switch and also the pa. good luck guys
Logged

eshak_gsm

  • Newbie
  • *
  • Posts: 20
  • Karma: +10/-0
    • View Profile
---no network---
« Reply #6 on: November 06, 2007, 07:27:34 PM »
bro..... u must use 7pin cable its ok
Logged

Srimeenakshimobiles

---no network---
« Reply #6 on: November 06, 2007, 07:27:34 PM »
Pages: [1]
« previous next »
 
SimplePortal 2.3.7 © 2008-2025, SimplePortal