Logs of Successfully Flashed Done by BB5 Service Tool

[kanniappan]

Logs of Successfully Flashed/ unlocked Done by BB5 Service Tool

Other post will be deleted without information

[kanniappan]

Nokia 200 Flash Success

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 52 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 049534585242B838801506BF447856A6
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized

• : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000

• : FLASH_LEN : 0x01000000

FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
Read done

IMEI : 359592053954643
CBR BBSN : 049534585242B838801506BF447856A6
PHB BBSN : 049534585242B838801506BF447856A6
[CBR] : CBR is Ok, match with BB SN. Phone Security is Alive :)

SimLock : Open (Not Locked)

File Saved to : 359592053954643_MTK.bin
Security [RPL] Saved to : 359592053954643.mtsec
Read Done!

Connect phone on selected interface...

[kanniappan]

Nokia 208 Flash Success

Core : v1.91 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm949__10.34.mcusw
PPM : rm949__10.34.ppm_m2
CNT : rm949__10.34.image_m2_059S5K6
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len  : 0x16
IF xCPUID    : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID    :  50A9040900086941
IF Resp Data  :  50A9070100030101

Wait for user action : Insert battery

Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1340.100_M1S1
QUARK EEP config Ok
FLASHID : 20004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356698053304201
IMEI 2 : 356698053304219
Phone Product Code : 059S5L0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\InfinityBox_install_BEST_v1.91\Backup\Cert\356698053304201_2nd_XG618_CRT.rpl


   ===Flashing [MCU]===
Processing file : rm949__10.34.mcusw
Region count : 8
00 : [ PSI ]   : psi_flash_unsigned.fls
01 : [ BCore ] : slb_signed.fls
02 : [ Code ]  : main_toc_signed.fls
03 : [ Code ]  : rm949__10.34.mcusw_signed_mcusw.fls
04 : [ Code ]  : swap_signed.fls
05 : [ Cust ]  : dynsw.fls
06 : [ Code ]  : aeneas_signed.fls
07 : [ Code ]  : fota_signed.fls
Parse done , flashing now

Flash : 00 : psi_flash_unsigned.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x00090000 , Len : 0x00020000
Erase now...
Erase done
Region Start : 0x00090000 , Data Len : 0x00010FB0
Region Load done
Write done
psi_flash_unsigned.fls image flash done

Flash : 01 : slb_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0001 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60000000 , Len : 0x00040000
Erase now...
Erase done
Region Start : 0x60000000 , Data Len : 0x00040000
Region Load done
Write done
slb_signed.fls image flash done

Flash : 02 : main_toc_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0002 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60040000 , Len : 0x00000400
Erase now...
Erase done
Region Start : 0x60040000 , Data Len : 0x00000400
Region Load done
Write done
main_toc_signed.fls image flash done

Flash : 03 : rm949__10.34.mcusw_signed_mcusw.fls
Sending Sec-Pack
SecInfo Area : 0x0003 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62E00000 , Len : 0x01100000
Erase now...
Erase done
Erase area 0x01 , Start 0xFFF00000 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x62E00000 , Data Len : 0x00F5CAC4
Region Load done
Write done
rm949__10.34.mcusw_signed_mcusw.fls image flash done

Flash : 04 : swap_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0004 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80000000 , Len : 0x00F00000
Erase now...
Erase done
Region Start : 0x80000000 , Data Len : 0x00C2E6C4
Region Load done
Write done
swap_signed.fls image flash done

Flash : 05 : dynsw.fls
Sending Sec-Pack
SecInfo Area : 0x0005 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62080000 , Len : 0x00100000
Erase now...
Erase done
Region Start : 0x62080000 , Data Len : 0x00044000
Region Load done
Write done
dynsw.fls image flash done

Flash : 06 : aeneas_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0006 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x63F79C00 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x63F79C00 , Data Len : 0x00046870
Region Load done
Write done
aeneas_signed.fls image flash done

Flash : 07 : fota_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0007 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x61F00004 , Len : 0x0017FFFC
Erase now...
Erase done
Region Start : 0x61F00004 , Data Len : 0x00149A90
Region Load done
Write done
fota_signed.fls image flash done

   ===Flashing [PPM]===
Processing file : rm949__10.34.ppm_m2
Region count : 1
00 : [ Cust ]  : package_m2.ppm_ebl_psi.fls
Parse done , flashing now

Flash : 00 : package_m2.ppm_ebl_psi.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80F00000 , Len : 0x00B00000
Erase now...
Erase done
Region Start : 0x80F00000 , Data Len : 0x0053F280
Region Load done
Write done
package_m2.ppm_ebl_psi.fls image flash done

   ===Flashing [CNT]===
Processing file : rm949__10.34.image_m2_059S5K6
Region count : 1
00 : [ Cust ]  : package_m2_059S5K6.image.fls
Parse done , flashing now

Flash : 00 : package_m2_059S5K6.image.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0xA1000000 , Len : 0x0C580000
Erase now...
Erase done
Erase area 0x01 , Start 0xAE000000 , Len : 0x00300000
Erase now...
Erase done
Region Start : 0xA1000000 , Data Len : 0x0210AA00
Region Load done
Write done
package_m2_059S5K6.image.fls image flash done

Flashing done!
Total flash time : 00:00:13
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 208 Dual SIM
Software Info:     V 10.34 13-03-14 RM-949 (c) Nokia            
IMEI:  356698053304201
PPM version :   V 10.34 13-03-14 RM-949 (c) Nokia             M2
Product code:  059S5K6
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Resetting LifeTimer
Check phone mode...
Phone in Test mode
Seting Local mode... wait...
Local mode set
Reset Done!
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:01:08
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

[kanniappan]

C5-00 Flash Done

Core : v1.91 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm745_101.003_prd.core.fpsx
PPM : rm745_101.003_11.01_MEA_C_prd.rofs2.fpsx
PPM2 : rm745_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm745_101.003_U000.000_prd.uda.fpsx
APE : rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001060
PUBLIC ID:     0D50011094985A407E6144397EF4A4C18BF43A41
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353275054692893
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\353275054692893_CRT.rpl


 === SW Version Check ===
- > UPGRADE
 === SW Version Check ===

   ===Flashing [MCU]===
Erase : Processing rm745_101.003_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm745_101.003_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 413 blocks
TIME : Write time : 00:00:15
MCU Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm745_101.003_11.01_MEA_C_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_101.003_11.01_MEA_C_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 166 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm745_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm745_101.003_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm745_101.003_U000.000_prd.uda.fpsx
Total writen 36 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000

   ===Flashing [APE]===
Erase : Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 10 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000007 / 00000007 / 00000000

ADL: Close_Session
Content: 000300000000070000000700000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:35
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia C5-00
Software Info:     V ICPR82_11w16.3.13 15-06-12 RM-745 (c) Nokia
IMEI:  353275054692893
Ape Version: 101.003
Product code:  059K4H0
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
AfterFlash operations done
Done!

[kanniappan]

X2-02 Flash Done....

Core : v1.90 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm694__11.84.mcusw
PPM : rm694__11.84.ppm_m_a
CNT : rm694__11.84.image_m_a_059D1B3
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
->  Check SW version...
FlashFile version : 11.84
Phone version : 10.91 08-02-12 RM-694 (c) Nokia            
->  Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...

SL3 Simlock read (XGOLD) ... Ok
WMDRM Key read ... Ok

Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 351960051714020
IMEI 2 : 351960051714038
PCcode : 059D1B3

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351960051714020_XG213.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm694__11.84.mcusw
Image : rm694__11.84.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01980000
Erasing, wait ...
Erase done, time : 00:02:08
Write , Start : 0x40280000 , Len : 0x01900000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xB615

   ===Flashing [PPM]===
File : rm694__11.84.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:22
Write , Start : 0x41C00000 , Len : 0x00440340
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0x40FC

   ===Flashing [CNT]===
File : rm694__11.84.image_m_a_059D1B3
Image : package_m_a_059D1B3.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ...
Erase done, time : 00:03:37
Write , Start : 0x42300000 , Len : 0x00DC0000
Flashing , wait ...
Region flash done, time : 00:00:19
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0x1F63

Flashing done!
Total flash time : 00:07:23
Reboot phone now...

Reading Phone Info....
Connected phone -   X2-02
Software Info:     V 11.84 13-09-12 RM-694 (c) Nokia            
IMEI:  351960051714020
PPM version :   V 11.84 13-09-12 RM-694 (c) Nokia             M_A
Product code:  059D1B3
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 43 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:08:14
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

[kanniappan]

Nokia 6600i Slide

Core : v1.90 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm570__36.60.mcusw
PPM : rm570__36.60.ppm_mea6
CNT : rm570__36.60_ISM_014.image_mea6_pk_black
Flashing phone now...
[Gen] Rules accepted for : RAP3x Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID:       000000010000022600010006030C192101023000
CPU ID :       RAP3Gv3 , Features : No any extended features
RAP_PUB:   09B0001689508C5691C1B24F9E06971286C17175
CMT_ROOT:  9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
   ===Flashing [MCU]===
Erase : Processing rm570__36.60.mcusw
Found 5 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x01780000 - 0x0197FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0177FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:39
Write : Processing rm570__36.60.mcusw
Total 116 [116/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:02:29
MCU Write done
   ===Flashing [PPM]===
Erase : Processing rm570__36.60.ppm_mea6
Found 1 areas to erase
Erasing area 0x01980000 - 0x021BFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:32
Write : Processing rm570__36.60.ppm_mea6
Total 23 [23/0/0] blocks to write, writing...
TIME : Write time : 00:00:36
PPM Write done
   ===Flashing [CNT]===
Erase : Processing rm570__36.60_ISM_014.image_mea6_pk_black
Found 2 areas to erase
Erasing area 0x02620000 - 0x03F9FFFF, NOR, CMT
Result: 0000
Erasing area 0x021C0000 - 0x0261FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:55
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm570__36.60_ISM_014.image_mea6_pk_black
Total 38 [38/0/0] blocks to write, writing...
TIME : Write time : 00:00:55
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:08:09
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 6600i slide
Software Info:     V 36.60 07-12-09 RM-570 (c) Nokia            
IMEI:  355249038750711
PPM version :   V 36.60 07-12-09 RM-570 (c) Nokia             M6
Product code:  0583369
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 0 certs
Uploading User Certificates...
Uploaded 26 certs!
Battery voltage is enough for start
AfterFlash operations done
Done!

Elapsed: 00:09:18

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

[kanniappan]

Nokia 6303I Flash done

Core : v1.90 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm638__10.80.mcusw
PPM : rm638__10.80.ppm_meac
CNT : rm638__10.80.image_meac_0594414_010
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600000001020C192102054100
CPU ID :       RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10800202CB860E49AD530A0E9D8D8BAD0F8633E6
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg  ,  Rev : 3.0  Ver : 12.8.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: phone is in flash mode

 === SW Version Check ===
- > UPGRADE
 === SW Version Check ===

   ===Flashing [MCU]===
Erase : Processing rm638__10.80.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 126 blocks
TIME : Write time : 00:00:52
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm638__10.80.ppm_meac
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.ppm_meac
Total writen 23 blocks
TIME : Write time : 00:00:10
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm638__10.80.image_meac_0594414_010
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm638__10.80.image_meac_0594414_010
Total writen 105 blocks
TIME : Write time : 00:00:52
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:58
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 6303i classic
Software Info:     V 10.80 21-01-11 RM-638 (c) Nokia            
IMEI:  358302036328738
PPM version :   V 10.80 21-01-11 RM-638 (c) Nokia             MEC
Product code:  0594412
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 34 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done
Done!

Elapsed: 00:02:33
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

[kanniappan]

Nokia 6233 CNT Flash Done

Core : v1.90 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
CNT : rm123_145_30005.60.image_g
Flashing phone now...
[Gen] Rules accepted for : RAP3x Generation
Check files done...
-> SWversion check skipped : Custom mode selected
Backup CRT308 data...
CRT308 Backup Created
->  MMC pass Record found, saving...
Getting product info...
RAP_BOOT:     0803000002010000
RAP_PUBLIC:   25D001028A8C0254583891D9542E54948A877893
CMT_ROOTKEY:  BAF3A9C3DBFA8454937DB77F2B8852B1
RAP_PAPUBKEY: 2F36DDC4990FD844712A61A80C033211BD9602E3
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm123_145_30005.60.image_g
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Loader len: 236992, CHK: 0254
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL Server confirm flashmode!
   ===Flashing [CNT]===
Erase : Processing rm123_145_30005.60.image_g_128
Found 2 areas to erase
Erasing area 0x016E0000 - 0x01E7FFFF, NOR, CMT
Result: 0000
Erasing area 0x01E80000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:27
Write : Processing rm123_145_30005.60.image_g_128
Total 128 [128/0/0] blocks to write, writing...
TIME : Write time : 00:00:11
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:00:39
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 6233
Software Info:     V 05.60 14-09-07 RM-145 (c) Nokia
IMEI:  352744014931221
PPM version :   V 05.60 14-09-07 RM123_145_- (c) Nokia G
Product code:  0532188
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 0 certs
Uploading User Certificates...
Uploaded 26 certs!
Battery voltage is enough for start
AfterFlash operations done
Done!

Elapsed: 00:01:11

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

[kanniappan]

Nokia 206 Done

-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356352058999181
IMEI 2 : 356352058999199
PCcode : 059Q4J7

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\356352058999181_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:12
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xFA4D

   ===Flashing [PPM]===
File : rm872__04.52.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ...
Erase done, time : 00:00:26
Write , Start : 0x41A80000 , Len : 0x003C68F0
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xC9E6

   ===Flashing [CNT]===
File : rm872__04.52.image_m2_059Q4J7
Image : package_m2_059Q4J7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ...
Erase done, time : 00:03:49
Write , Start : 0x42100000 , Len : 0x01040000
Flashing , wait ...
Region flash done, time : 00:00:22
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0x5521

Flashing done!
Total flash time : 00:07:45
Reboot phone now...

Reading Phone Info....
Connected phone -   206
Software Info:     V 04.52 30-06-13 RM-872 (c) Nokia            
IMEI:  356352058999181
PPM version :   V 04.52 30-06-13 RM-872 (c) Nokia             M2
Product code:  059Q4J7
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:09:05

[kanniappan]

Nokia 202 Flash Done

Connect phone on selected interface...

Core : v1.92 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm834__20.52.mcusw
PPM : rm834__20.52.ppm_m_c
CNT : rm834__20.52.image_m_c_059M6B8
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.47_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 353679056247624
IMEI 2 : 353679056247632
PCcode : 059M692

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : D:\SAEEDULLAH KHAN\Infinity\BB5 Easy Service Tool\InfinityBox_install_BEST_v1.92\Backup\Cert\353679056247624_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm834__20.52.mcusw
Image : rm834__20.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ...
Erase done, time : 00:00:55
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:47
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xD2A9

   ===Flashing [PPM]===
File : rm834__20.52.ppm_m_c
Image : package_m_c.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:08
Write , Start : 0x41DC0000 , Len : 0x005599D8
Flashing , wait ...
Region flash done, time : 00:00:07
CRC check passed , 0xBCE5

   ===Flashing [CNT]===
File : rm834__20.52.image_m_c_059M6B8
Image : package_m_c_059M6B8.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ...
Erase done, time : 00:01:01
Write , Start : 0x424C0000 , Len : 0x00CC0000
Flashing , wait ...
Region flash done, time : 00:00:18
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0xB623

Flashing done!
Total flash time : 00:03:26
Reboot phone now...

Reading Phone Info....
Connected phone -   202
Software Info:     V 20.52 27-09-12 RM-834 (c) Nokia            
IMEI:  353679056247624
PPM version :   V 20.52 27-09-12 RM-834 (c) Nokia             M_C
Product code:  059N1K4
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Resetting LifeTimer
Reset Done!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:04:30
Connect phone on selected interface...

[kanniappan]

Lumia 620 Done

[kanniappan]

Asha 202 Flash Done


Connect phone on selected interface...

Core : v1.92 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm834__20.52.mcusw
PPM : rm834__20.52.ppm_m_a
CNT : rm834__20.52.image_m_a_059M6C0
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.47_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 353679056253366
IMEI 2 : 353679056253374
PCcode : 059N1K4

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Flashing Softwares\12+Best dongle\InfinityBox\BEST\Backup\Cert\353679056253366_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm834__20.52.mcusw
Image : rm834__20.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ...
Erase done, time : 00:00:58
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:48
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xD2A9

   ===Flashing [PPM]===
File : rm834__20.52.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:09
Write , Start : 0x41DC0000 , Len : 0x0041B6E4
Flashing , wait ...
Region flash done, time : 00:00:06
CRC check passed , 0xBBFE

   ===Flashing [CNT]===
File : rm834__20.52.image_m_a_059M6C0
Image : package_m_a_059M6C0.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ...
Erase done, time : 00:01:01
Write , Start : 0x424C0000 , Len : 0x00CC0000
Flashing , wait ...
Region flash done, time : 00:00:21
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0xC996

Flashing done!
Total flash time : 00:03:33
Reboot phone now...

Reading Phone Info....
Connected phone -   202
Software Info:     V 20.52 27-09-12 RM-834 (c) Nokia            
IMEI:  353679056253366
PPM version :   V 20.52 27-09-12 RM-834 (c) Nokia             M_A
Product code:  059N1K4
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:04:46
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

[kanniappan]

Nokia 220 Flash Done


Core : v1.92 , MTKx FlashEngine : v4.2

Verify files ...
MAUI : RM-969_ROM_eMP_10.03.11
VIVA : RM-969_VIVA_eMP_10.03.11
LANG : RM-969_LANG_PACK_ROM_IC_eMP_10.03.11
CUST : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_10.03.11
JMPT : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_10.03.11
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 290 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : E8B7152F35F02FDA0933FF58EEB00AC9
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized

• : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000

• : FLASH_LEN : 0x01000000

FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
SecureDecrypt : RM-969_ROM_eMP_10.03.11
SecureDecrypt : RM-969_VIVA_eMP_10.03.11
SecureDecrypt : RM-969_LANG_PACK_ROM_IC_eMP_10.03.11
SecureDecrypt : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_10.03.11
SecureDecrypt : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_10.03.11
OVRLP : 000069B900000001
PHPID : Rivendell.10.03.11.p1
 === Backup Enabled
Reading RPL backup...
IMEI : 359592053708205
RPL [Security] Saved to : 359592053708205_2nd.mtsec
 === Backup
OVRLP : 00004DF900000001
[ERROR] : DA_CBR_NOT_FOUND
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-969_ROM_eMP_10.03.11
Write : RM-969_LANG_PACK_ROM_IC_eMP_10.03.11
Write : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_10.03.11
Write : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_10.03.11
Write : RM-969_VIVA_eMP_10.03.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-969_ROM_eMP_10.03.11
[VERIFY] DONE : RM-969_LANG_PACK_ROM_IC_eMP_10.03.11
[VERIFY] DONE : RM-969_CUSTPACK_ROM_IC_MEA_JO_eMP_10.03.11
[VERIFY] DONE : RM-969_JUMP_TABLE_IC_MEA_JO_eMP_10.03.11
[VERIFY] DONE : RM-969_VIVA_eMP_10.03.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:03:14
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     10.03.11 00-00-00 RM-969
IMEI:  359592053708205
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :   IC
Product code:  059V1Z2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...

[kanniappan]

Asha 206 Flash Done


Core : v1.92 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.52.mcusw
PPM : rm872__04.52.ppm_m2
CNT : rm872__04.52.image_m2_059Q8K6
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 355944050577105
IMEI 2 : 355944050577113
PCcode : 059Q8K6

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Flashing Softwares\12+Best dongle\InfinityBox\BEST\Backup\Cert\355944050577105_2nd_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:14
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xFA4D

   ===Flashing [PPM]===
File : rm872__04.52.ppm_m2
Image : package_m2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ...
Erase done, time : 00:00:30
Write , Start : 0x41A80000 , Len : 0x003C68F0
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xC9E6

   ===Flashing [CNT]===
File : rm872__04.52.image_m2_059Q8K6
Image : package_m2_059Q8K6.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ...
Erase done, time : 00:03:48
Write , Start : 0x42100000 , Len : 0x01040000
Flashing , wait ...
Region flash done, time : 00:00:23
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0xB2FD

Flashing done!
Total flash time : 00:07:52
Reboot phone now...

Reading Phone Info....
Connected phone -   206
Software Info:     V 04.52 30-06-13 RM-872 (c) Nokia            
IMEI:  355944050577105
PPM version :   V 04.52 30-06-13 RM-872 (c) Nokia             M2
Product code:  059Q8K6
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
AfterFlash operations done
Done!
Connect phone on selected interface...


Elapsed: 00:08:50
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

[kanniappan]

NOKIA X RM-980 FULL FLASHING:



Connect phone on selected interface...

Core : v1.92 , NXP FlashEngine : v1.5

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode
Ok, Set : RM980_1.1.2.2_059T9G0_IMEA_AE_variant.img
Ok, Set : RM980_1.1.2.2_boot.img
Ok, Set : RM980_1.1.2.2_cache.img
Ok, Set : RM980_1.1.2.2_emmc_appsboot.mbn
Ok, Set : RM980_1.1.2.2_emmc_appsboothd.mbn
Ok, Set : RM980_1.1.2.2_fat.bin
Ok, Set : RM980_1.1.2.2_oemsbl.mbn
Ok, Set : RM980_1.1.2.2_oemsblhd.mbn
Ok, Set : RM980_1.1.2.2_persist.img
Ok, Set : RM980_1.1.2.2_preload.img
Ok, Set : RM980_1.1.2.2_qcsbl.mbn
Ok, Set : RM980_1.1.2.2_qcsblhd_cfgdata.mbn
Ok, Set : RM980_1.1.2.2_recovery.img
Ok, Set : RM980_1.1.2.2_system.img
Ok, Set : RM980_1.1.2.2_udisk.bin
Ok, Set : RM980_1.1.2.2_userdata.img

File HW revision is : HW Revision V1

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Press and hold 'Volume Down' and 'Power' buttons
3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button
4. Insert USB cable and hold button, until phone will be detected

Connect Ok

Get Phone Initial Info
Product : MSM7627A
Version : 0.5
Serial  : 797FC0DE

Processing : RM980_1.1.2.2_qcsblhd_cfgdata.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_qcsbl.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_oemsblhd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_oemsbl.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM980_1.1.2.2_emmc_appsboothd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_emmc_appsboot.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM980_1.1.2.2_boot.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_recovery.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_persist.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_fat.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_system.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_cache.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_userdata.img
Erase Partition : USERDATA
Partition Erase Done
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_udisk.bin
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM980_1.1.2.2_preload.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM980_1.1.2.2_059T9G0_IMEA_AE_variant.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Rebooting phone now

Flashing done!
Total flash time : 00:03:40
Reboot phone Ok

Connect phone on selected interface...