Rokea R212 SPD 6800h cpu
flash size 132mb
Uploaded with
ImageShack.us (Use usb mode
flash type nand
change boot mode to 6800h)
Here the screen shot#
Format#
Uploaded with
ImageShack.us Flash#
Uploaded with
ImageShack.us Full log#
nitializing...
DA_LIB_VER_5.1.4.3
Note : After Flash Press hold power button for 1 to 2 mins.
It is sensing the pinout fast...
D-=21 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM90
Connected...sending boot...
FDL test...OK
ArmBootMode: 6803000000DE5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6800H3 Flash: NAND_TC58NVG0S3AFT_3
setting the Flash Parameters...
Settings have been completed!
Checking the SBF...
Try to read info from file...
done.
Loading and initialize the MTD driver...
Done.
Analysing file...Please wait...
Partition_Count=10
ExtractFile Done.
Downloading Bootloader packet...
Bootloader Partition write to flash is done.
Downloading KernelImg packet...
KernelImg Partition write to flash is done.
Downloading UserImg packet...
UserImg Partition write to flash is done.
Downloading NV packet...
NV Partition write to flash is done.
Downloading PhaseCheck packet...
PhaseCheck Partition write to flash is done.
Downloading MMIRes packet...
MMIRes Partition write to flash is done.
Downloading TTS_DISK packet...
TTS_DISK Partition write to flash is done.
All partition is Done.
