ATF Metal Chrome Box FBUS Flashing Fix LogiCore 10.3.50

[kanniappan]

Hi,

If you are using ATF Big Chrome Box (non modified pcb) and you are  getting problems in FBUS Flashing after updating to 9.70 and LogiCore  10.5.30 similar to end users below:


Then you can fix the problem by carefully following the steps below:

1. Remove all other GSM Boxes from USB Port, and only connect ATF Box.

2. Run ATF Software, and go to Product Support tab. Make sure the
correct Box Type is selected, then click "Restore Box"



3. Wait 3-5 Minutes until Box Restore is Finish... Then click "Update Firmware"



After firmware update is finished, you will now  have the Fixed Version of LogiCore 10.3.50 for ATF Big Chrome Box (non  modified PCB).



WARNING---WARNING---WARNING---WARNING---WARNING---WARNING
WARNING---WARNING---WARNING---WARNING---WARNING---WARNING

THIS IS ONLY FOR ATF BIG CHROME BOX WITH NON MODIFIED PCB!!!

IF YOU ARE USING ATF NITRO, PLEASE DO NOT DO THIS.
IF YOU ARE USING ATF LIGHTNING, PLEASE DO NOT DO THIS.
IF YOU ARE USING ATF BIG CHROME BOX WITH MODIFIED PCB, PLEASE DO NOT DO THIS.

WARNING---WARNING---WARNING---WARNING---WARNING---WARNING
WARNING---WARNING---WARNING---WARNING---WARNING---WARNING