[Samsung Supported Phones for SDC Unbrick

[kanniappan]

Image Creator + Test Point

SDC files are here
 
 SAMSUNG SDC FILES by d18.builder - 4shared

N900A successfully crate sdc file
 
 




[ame=http://www.youtube.com/watch?v=0jT4NwODXL0&feature=player_embedded]ATF Plus - SDC Tool [Un-Brick] Samsung S3 - YouTube[/ame]


Repair efs use this file i9300 N7100_EFS.tar - Download - 4shared

 you need some skill for samsung.
 
1. Insert Micro SD Card to Phone
2. Make Sure Battery is Fully Charged
 3. Connect UART Cable (150K Resistor) / Samsung Download Mode JIG
 http://smart-gsm.net/smart-cables/10...-mode-jig.html
4. Wait upto 5 Minutes... Until phone booting to download mode.
5. Remove Battery and Remove Micro SD Card
6. Flash Phone with ODIN / Other samsung flashtools.


You can unbrick I9300 without TP... But you need to use READY-MADE SDC File from
here: GT-I9300_I9500_N7100.img - Download - 4shared
 
 
If you create your OWN SDC file using flash files for this phone, then you will NEED TP.
 This is because it is a different kind of SDC File created.... one that will only work when SDCARD mode is forced.

Download from here: SAMSUNG SDC FILES by d18.builder - 4shared