IPHONE 3g UNLOCKING

[Astigg 11]

IPHONE 3G UNLOCKING




ULOCKING APPLICATIONS SOURCES


Cydia source: http://apt9.yellowsn0w.com/
Installer repo: http://i.yellowsn0w.com/

How to Unlock the iPhone 3G GUIDE

How to Jailbreak Your 2.x.x 3G iPhone Using QuickPwn (Windows)

IPHONE FIRMWARE 2.2.0 (3G

if not working for u try this

1.) Turn off your phone
2.) Turn on your phone
3.) Get off the SIM tray
4.) Wait a lil bit, and get it in
5.) Wait 1-2 minutes, if it don't work turn ON the AirPlane Mode, wait 30 seconds, turn the AirPlane Mode OFF. Wait a lil bit.

TESTED AND WORKING TRY AND ENJOY WITH YOUR IPHONE 3G
AND THANXZ TO DEV TEAM

UPDATES
Soon you’ll see yellowsn0w 0.9.1 in the repos. It uses a much longer delay to let your SIM card initialize. If you have problems with 0.9.0, try this one and wait a full minute after you seem homescreen, then reinsert sim card. We need both success and failure reports to tune this across the world, so please be patient (but please also report result!)
If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line <string>-q</string> right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)[/

more info here

[Astigg 11]

These are instructions on how to software unlock the iPhone 3G for use with any GSM cellphone carrier.

Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 02.28.00 baseband(modem firmware). This means that you must be running the 2.2 firmware. If you used PwnageTool to update to 2.2 from 2.1 you will have to rejailbreak using a QuickPwn jailbreak tutorial for the time being.

To find your firmware and modem firmware(baseband) versions you can follow this tutorial. If you are not on firmware version 2.2 and baseband version 02.28.00 then you need to follow one of these tutorials before unlocking: Mac, Windows

Step One
Press to launch Cydia Installer from your SpringBoard.


Step Two
Press to select the Manage tab at the bottom of the screen.


Step Three
Press to select the large Sources button


Step Four
Press the Edit button at the top right of the screen.

[Astigg 11]

Step Five
Press the Add button at the top left of the screen.


Step Six
Enter http://apt9.yellowsn0w.com/ as the source url and press the Add Source button.


Step Seven
Once the source has been added press the large Return to Cydia button.


Step Eight
Press the Done button at the top right of the screen.
[URL="http://www.iclarified.com/images/tutorials/2538/10469/10469.png"]

[Astigg 11]

Step Five
Press the Add button at the top left of the screen.


Step Six
Enter http://apt9.yellowsn0w.com/ as the source url and press the Add Source button.


Step Seven
Once the source has been added press the large Return to Cydia button.


Step Eight
Press the Done button at the top right of the screen.
[URL="http://www.iclarified.com/images/tutorials/2538/10469/10469.png"]

[Astigg 11]

Step Nine
Press to select apt9.yellowsn0w.com from the list of user entered sources.


Step Ten
Press to select yellowsn0w from the list of packages


Step Eleven
Press the Install button at the top right of the screen.


Step Twelve
Press the Confirm button at the top right of the screen.

[Astigg 11]

Step Thir****
After installation completes successfully press the large Return to Cydia button.


Step Four****
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.

[Astigg 11]

Step Thir****
After installation completes successfully press the large Return to Cydia button.


Step Four****
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.




Step Fif****
You should now be able to insert the SIM of your choice!

***NOTE: There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” “lotto numbers” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. The Dev-Team is workin on a better fix.

***THANKS: A big thank you to all the members of the iPhone Dev-Team for all their hard work! It is much appreciated by all.

GUIDE BY iclarified

[Astigg 11]

video tutorial for 3G iphone watch carefully

http://www.iclarified.com/player/des...538&meid=10478


plss edit my post...
thank you...